Hi mate
As other guys told you your Atmega it is blocked
You need to unblock it with a High Voltage Paralel Programmer or how it is named "Atmega Doctor"
Or if your tool was burned by an K-line 12V short maybe the Atemga it is burned.
But I supposed that it is just blocked.
Good luck
THANKS FOR YOU WORKING GOOD
Last edited by doaa; 15th March, 2012 at 11:19 AM.
Col19 (3rd March, 2021)
Thank you very very much, my cable working again!!
hello,
is possible to repair cable 11.11 to 11.11.3 ?
serial for 11.11.3?
Yes you need 11.11.3 dump
As my friend Aminebot said in the past the dump you need to be extracted from an old interace with BM because if you have a dump extracted from a new VCDS tool you'll not be able to use it if you do not moded the softwear because it you'll ask for the FTDI RQ ID.
Think about this and you now this dump can be for free maybe after an year at least or never
Good luck
Last edited by mattydr67; 2nd July, 2012 at 09:35 AM.
hi , i'm new to this , but does the china blue cable work also on VCDS ?
tnx for 908
my interface stopped working, the computer does not recognize it interface.
Read EEPROM successful Device 0
0000 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
0010 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
0020 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
0030 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
0040 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
0050 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
0060 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
0070 : 55 46 55 46 55 46 55 46 55 46 55 46 55 46 55 46 FU FU FU FU FU FU FU FU
What could be the reason? ...
E2prom enough to program?
I need to program the 93C56.
Any help?
thanks.
Last edited by Africa; 26th September, 2012 at 12:44 PM.
Original BDM EVC with adapters, SPI EVC, Galep5 programmer, emp11 programmer, upa1.3, kwp2000plus, MPPS, Ktag, Kess, Galletto ofiicial, and many more...
Col19 (13th November, 2019)
No need to take the eeprom out. Just reflash with M-Prog3.0 or FT Prog.
If the device is not recognized there is on DK Popsted some tools to repair VID PID of FTDI chip.
If you will not solve. Contact me on PM tonight, im not at home at the moment.
BR
__________________
If You Like My Post
Please use the button on the LEFT side and the button on the RIGHT side.
Tuning, EGR, DPF, AdBlue, DTC, TVA, Speed Limit, Immo...
Last edited by Africa; 26th September, 2012 at 01:01 PM.
Original BDM EVC with adapters, SPI EVC, Galep5 programmer, emp11 programmer, upa1.3, kwp2000plus, MPPS, Ktag, Kess, Galletto ofiicial, and many more...
Bookmarks