Check this file.
Hi m8,
This morning one customer cames to me with Audi A6 2.0Tdi from 2006,ECU EDC16 03G906016GB 1037380438, without particle filter. He removed it previously.
I read software with Byteshooter and I modified it with ECU Safe 2.0, but still light is on and car hasn't power.
Any ideea please?
Can somebody help me with another modified software?
Thanks,
thanks. i will check it and i will report
it is not working, same problem, light it is ON
You must post here EEPROM from ecu with bdm then I can make proper Dpf off inside EEPROM is ash counter this need to be mod,
Eco
All DPF / FAP REMOVED MANUALLY
TUNING ALL ECU INC EDC17 - SIEMENS - DENSO - HITACHI
You don`t need change eeprom, ori flash modifed is enough
Last edited by chli1976; 9th December, 2011 at 09:52 PM.
Originally Posted by chli1976
You don`t need change eeprom, ori flash modifed is enough
You could not be a bit clear to explain how?
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Bookmarks