Send dump from sbc. I will reset it
Hi guys i have a w211 270cdi and want to remove this fault C2498 from sbc unit .
I have das developer and i tried to reset the times press the brake pedal.
I see the first times press is about 500.000 and after reset with this instruction * is 1024 times press, i drive about 20 min the car, but the fault the still exist and i can't erase the fault.
Please does anyone know how I can erase the fault?
Many thanks in advance.
the car is out of warranty
*
then 1 line down there you see Bremsenzahler aktualisieren und Lebensdauerzahler F neu berechenen -> click it !
Parameter uINBR = 0
then click F3
1 line down Bremsenzahler auf beliebigen Wert setzen (DJ_SetNBr) -> click it
Parameter uINBR = 0
then click F3
then scroll down untill you see the line's :
Lebensdauerzahler F neu berechenen (DJ_CalcLiveTime)
Parameter uINBR = 0
then click F3
Lebensdauerzahler F neu berechenen und schreiben (DJ_BuildAndWriteF)
Parameter uINBR = 0
then click F3
Log out of SBC !!
log out of verhicle !!
Send dump from sbc. I will reset it
Hi many thanks for you interest my friend.
How can to read the dump from sbc unit.
no possible this errorcode erase
They did have a 100k warranty extension on SBC for this fault in the US. Maybe you already know this and this is why you highlited it, but maybe not. There are SBC tools for this.
AVDI fixes this problem , you can with it read the eeprom by obd2 and then rest the module. Post your dump as told
Sent from iPhone 4S
Did you try to reset this two?
(DJ_SetLiveTimeNew) uINBR = 0
(DJ_SetLiveTime) uINBR = 0
even though 2 legs from 8 are not bonded, a spider is a still spider (93c86)
SOLUTION IS TO READ DUMP FROM SBC MODULE TO RESSET IT AND AFTER YOU WILL WRITE A RESTED DUMP TO YOUR SBC MODULE TESTED 1000%
Many thanks guys i can to read the sbc modul only with avdi tool ? or with das developer or other tool?
Many thanks in advance.
Last edited by spiridonas; 6th February, 2012 at 08:07 PM.
How about "EEPROM" or "EEPROM Upper Page" function in developer mode?
eep.jpg
even though 2 legs from 8 are not bonded, a spider is a still spider (93c86)
Yes i can see only the address and byte from dump but i can't read/write i think.
You will get different dump if you read by Star Diag, or you read by manually. I don't know how can you convert the dumps, maybe somebody know it?!
even though 2 legs from 8 are not bonded, a spider is a still spider (93c86)
even though 2 legs from 8 are not bonded, a spider is a still spider (93c86)
Yes i can see only the address and byte from dump but i can't read/write i think.
Bookmarks