MERCEDES W211 SBC C2498 RESET

**blueabyss** · 2nd August, 2012, 03:33 PM

Hello
Is there any solution for SBC - C2498. After
reading the line Bremsenzahler (DJ_GetBr Live Time) there is value 0.
I run the car well over 10 minutes as described in the manual, but
the error code is still present and can not be deleted.
Can you please advise a solution?
Mercedes Benz at the SBC does not want us to recognize a guarantee.

**feles** · 21st September, 2012, 12:54 AM

I have the same situation with "C235A Service threshold reached"
All counter changed to 0.

The SBC number started with 005.

Any solution?

Thanks!

**znoki** · 21st September, 2012, 06:07 AM

Originally Posted by feles

I have the same situation with "C235A Service threshold reached"
All counter changed to 0.

The SBC number started with 005.

Any solution?

Thanks!

PM sent!

**feles** · 21st September, 2012, 06:44 PM

How can I read internal i2c eprom with in circuit programmer?
Counter reset not work on this model.

**daviee** · 25th September, 2012, 05:31 PM

The question is: How can open this unit ???
I can't see any screw to open :-(

**znoki** · 26th September, 2012, 07:13 PM

There are no screws, only glued from the ribbed side.
Use a sharp flat screwdriver, but be careful!

Originally Posted by daviee

The question is: How can open this unit ???
I can't see any screw to open :-(

**smayer** · 26th September, 2012, 10:31 PM

Originally Posted by daviee

The question is: How can open this unit ???
I can't see any screw to open :-(

The question is... open this unit for what ?

**daviee** · 28th September, 2012, 02:17 PM

To read I2c, dont have AVDI

**smayer** · 28th September, 2012, 09:40 PM

Originally Posted by daviee

To read I2c, dont have AVDI

After open unit you think gona find the e2prom?

**smayer** · 28th September, 2012, 09:41 PM

Originally Posted by znoki

PM sent!

If you don't have solution send PM for what?

**znoki** · 29th September, 2012, 08:24 AM

Originally Posted by smayer

If you don't have solution send PM for what?

You ask me, why try to help???

**vwpassat** · 14th October, 2012, 10:29 AM

Is it true that AK500 repair SBC internal fault by re software R/W SBC content?

Does anybody have Ak 500 to confirm this?

**mercis** · 14th October, 2012, 11:15 AM

only c249f,if it can
c2498 can you with developer make

**smayer** · 14th October, 2012, 08:52 PM

Originally Posted by vwpassat

Is it true that AK500 repair SBC internal fault by re software R/W SBC content?

Does anybody have Ak 500 to confirm this?

I have AK500 and never have success repairing SBC.
Das developer it's a good solution if your unit part number don't start with A 005.

**grinich** · 14th October, 2012, 08:53 PM

Originally Posted by mercis

only c249f,if it can
c2498 can you with developer make

or can't you ?

If can: can you explain how?

Thanks a lot

Thread: MERCEDES W211 SBC C2498 RESET

Thread Tools

Display

The Following User Says Thank You to znoki For This Useful Post:

Bookmarks

Bookmarks

Posting Permissions