AJ's Sky UK Channel List **Discussion** Thread

[stonestaff]

Hi

When I unzip this file it has no extension and its not recognised by the OpenBox

Thanks

Stone

[smithie46]

with no $ on channel dont think it lets you ts or record a no it dont on s9 tried it months ago

[f1nuts]

when i update why am i only seeing 8 fav not 25?

[DW190]

when i update why am i only seeing 8 fav not 25?

Probably because the software on you box is only capable of eight. Updating the software may cure it.

[brithepi2k]

put these onto my Openbox S10 and now the box is dead? Nothing displays can anyone help?

Cheers

[DeejayAJ]

put these onto my Openbox S10 and now the box is dead? Nothing displays can anyone help?

Cheers

All 4 of these files has been tested on my S12 & work fine. Did you edit the files? Could you have rebooted before the flash had ended? Which list was it?

[brithepi2k]

All 4 of these files has been tested on my S12 & work fine. Did you edit the files? Could you have rebooted before the flash had ended? Which list was it?

Its ok for some reason a faulty usb was able to transfer the files to my box but when i upgraded by usb and that had complete i turned my box off and on and it was dead waited a good 5 minutes to see if it turned on but nothing was displaying then had to put the firmware back on the box...

[Rahxie]

put these onto my Openbox S10 and now the box is dead? Nothing displays can anyone help?

Cheers

Restart your s10 and the channels will reappear. The same happened to me so I tried a restart and it works a charm.

[g2147]

put these onto my Openbox S10 and now the box is dead? Nothing displays can anyone help?

Cheers

you need rs232 lead to connect to pc and erom upgrade prog

[redknight]

you need rs232 lead to connect to pc and erom upgrade prog

hi mate i had just last week 3 openbox s10 brick up . i managed to get two back up and running by reflashing them . the one thing i noticed is that the boxs stopped sending their tv signal to the tv via the hdmi cable . instead i rigged up the old white , yellow and red cables / scart connection to the tv and worked around that way . when you reflash , it is seconds for you to switch on the box to reflash when the program erom upgrade tells you to start the reflash . i am not the expert here but i have only ever up loaded the new tv channel list ever to the boxs . and always adjs list . there is something strange going on here . lads do not throw away your openbox s10 if you think they are bricked . they are not that hard to reflash . my openbox 10s are reflashed and connected to the tv via hdmi cable .

[farsoft]

Probably because the software on you box is only capable of eight. Updating the software may cure it.

I appear to have a similar issue. I copied the latest channel list to my X3 Openbox and can only see the first 9 Favorites correctly named; the rest are Fav Group 10, ?11, etc.
I checked the Fav. List using PVR800 Editor and the list looks fine. The software running on my X3 is: 3601HD_23_08_2012_06AA. Can anyone advise if there is an update and will the update correct the Fav list issue.

[Wingnut]

maybe u need to do a factory default first?, but remember it might wipe important things,make sure u save them first etc

[tjnwil4]

thanks great channel list just need a better epg and were cooking with gas

[DeejayAJ]

with no $ on channel dont think it lets you ts or record a no it dont on s9 tried it months ago

Yeah you're right, just tested it on my S12.. odd, thanks.

Updated OP.

[ztay21]

hi,

my skybox channels are all scrambled, but my **** is active as it says ********. what do i need to do? Thanks.