German Nokia Dbox2

**cromer** · 21st January, 2009, 04:10 PM

hi all

i bought a german dbox with neutrino image on it and it appears to be in debug mode... i can ftp in and have flash with laky image and sent across other releveant files... trouble is, when i reboot, i keep getting german settings et al... also, it keeps bringing up german channels and everything is in german... its a x2 box.. i've looke into how to change selections into english but the only option i'm offered is deutsch.. non english... also, although i can ftp in, each time i change dhcp to allow me to setup ip address, it does not save it... any ideas...

any help much appreciated..
cromer

**fredsuthers** · 21st January, 2009, 04:38 PM

How are you flashing the Laky image? Have you tried Boot without flashloader? Have you tried using Image Flashing Assistant? Does Laky come on at all? Your ram/rom may be in write protect mode or simply not in debug mode. Could also be a fault with the ram, if it comes up with the german settings and channels at every reboot. Try a fresh flash of the rom.

**gizmo.1484** · 21st January, 2009, 04:39 PM

Have you changed your service & bouquet files to english ones as you will just get german channels.
The files go in var/tuxbox/config/zapit
You can get the files from here>>>>>>>>Digital Kaos - Downloads - Services and Bouquets

**MetMan** · 21st January, 2009, 05:42 PM

Originally Posted by cromer

hi all

i bought a german dbox with neutrino image on it and it appears to be in debug mode... i can ftp in and have flash with laky image and sent across other releveant files... trouble is, when i reboot, i keep getting german settings et al... also, it keeps bringing up german channels and everything is in german... its a x2 box.. i've looke into how to change selections into english but the only option i'm offered is deutsch.. non english... also, although i can ftp in, each time i change dhcp to allow me to setup ip address, it does not save it... any ideas...

any help much appreciated..
cromer

check in the share/tuxbox/neutrino/locale if there is no english.locale add this

english.rar

look for the command 'Sprache' and see if u get an english option, this is for sportster 1.72 so chk ur img first.....post back if it is a different image.....the file has to match...prob safer to reflash a uk modded img

**maazkhan9869** · 24th February, 2013, 05:36 PM

Originally Posted by MetMan

check in the share/tuxbox/neutrino/locale if there is no english.locale add this

english.rar

look for the command 'Sprache' and see if u get an english option, this is for sportster 1.72 so chk ur img first.....post back if it is a different image.....the file has to match...prob safer to reflash a uk modded img

Is it possible to get all channels on dbox 2

**psats** · 25th February, 2013, 07:59 PM

Originally Posted by maazkhan9869

Is it possible to get all channels on dbox 2

....

**C64** · 21st January, 2009, 06:02 PM

Originally Posted by cromer

hi all

i bought a german dbox with neutrino image on it and it appears to be in debug mode... i can ftp in and have flash with laky image and sent across other releveant files... trouble is, when i reboot, i keep getting german settings et al... also, it keeps bringing up german channels and everything is in german... its a x2 box.. i've looke into how to change selections into english but the only option i'm offered is deutsch.. non english... also, although i can ftp in, each time i change dhcp to allow me to setup ip address, it does not save it... any ideas...

any help much appreciated..
cromer

Are you 100% certain that you've flashed the box correctly?

The menus etc should all be English after a reboot.

FTP your image into the TMP folder then flash the box using the software update feature in the Services Menu, select 'flash partition without bootloader'.

**cromer** · 21st January, 2009, 06:15 PM

ok all... will give what you say now and see how that goes and get back to you... thanks 4 that...

**cromer** · 21st January, 2009, 06:50 PM

okay... i've reflashed with the laky image which i hve successfully managed to do b4... but when it reboots, its still teh same as it was when i bought it... when i tried to copy ovr services and bouquets, i get a 553 could not create file... i thought my box was in debug mode as when it boots i get the usual screen full of numbers then loading kernel... it would seem anything i command is falling over... if you think the box is not in debug mode, i'll have a go at debuggint it.. could it be just a question of permissions at a higher level?

**MetMan** · 21st January, 2009, 06:52 PM

Originally Posted by cromer

okay... i've reflashed with the laky image which i hve successfully managed to do b4... but when it reboots, its still teh same as it was when i bought it... when i tried to copy ovr services and bouquets, i get a 553 could not create file... i thought my box was in debug mode as when it boots i get the usual screen full of numbers then loading kernel... it would seem anything i command is falling over... if you think the box is not in debug mode, i'll have a go at debuggint it.. could it be just a question of permissions at a higher level?

what method of flashing ftp or ifa?

**cromer** · 21st January, 2009, 06:58 PM

i'm flashing without bootloader but noticed the konfigfile at the bottom keeps reverting back to one it was setup up with when it arrived in /var/etc/squashfs.urls

**cromer** · 21st January, 2009, 07:04 PM

sorry meant to add flashing with ftp.... there's a section after software upgrade which says Experten-Funktionen and underneath that it says: Updatemodus which is set to Internet... looks suspicioulsy like its still set for anotehr net... the option other than internet is ftp but not sure if that would allow me to flash but will give it a go and get back to you...

**MetMan** · 21st January, 2009, 07:19 PM

Originally Posted by cromer

sorry meant to add flashing with ftp.... there's a section after software upgrade which says Experten-Funktionen and underneath that it says: Updatemodus which is set to Internet... looks suspicioulsy like its still set for anotehr net... the option other than internet is ftp but not sure if that would allow me to flash but will give it a go and get back to you...

do u see the img named after Experten-Funktionen then blue - flash one partition or what ever the german is and then flash without bootloader - do u see the laky img in file-selector??

**cromer** · 21st January, 2009, 07:35 PM

after expert function it has a konfigfile entry showing /var/etc/squashfs.urls ... no matter what i do, flash it or add appropriate files it always reverts back to what it was before i thought i'd changed... eg... i changed the image file to /tmp/lakys... and flashed which it said was successful... upon reboot... back to the squashfs.urls file... i'm sure its in debug mode as when it boots it looks like its in debug mode and when it shuts down, its has a screen which has the NEUTRINO next generation image

**father ted** · 21st January, 2009, 08:30 PM

try flashing it with ifa see if that cures it

Thread: German Nokia Dbox2

Thread Tools

Display

Hybrid View

German Nokia Dbox2

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions