Zed-Bull clone - Second Life

[3abas27]

perhaps you had harware clone zedbull
my one is frimawre 5.00 no problem with it it make module 62 on tpx2x good
i had also zedbull frmaware 5.02 i will test with it and make result

is this the problem when you buy clone devise
in china not all seller sell good quality
my one zedbul is china one old one with red key
2 years work it with perfect
in you case freind try with a freinds clone zedbull for jujing
if problem is effi software problem or hardware ^problem

[badenaleks]

Today added another key for Toyota Yaris 08 with the aid of Effie. All added to the first EH2 then at TP***1061;2. Everything works thanks Sierra! EFFI A good project !!!

[badenaleks]

Sorry. Mixed languages

[badenaleks]

Toyota Yaris '08 (original key 4D-67). Added with the aid effi flight level one key (chip TPX2) everything works great! Checked chip EH2 works too (Everything works fine)!Sierra best

[iozo]

is this the problem when you buy clone devise
in china not all seller sell good quality
my one zedbul is china one old one with red key
2 years work it with perfect
in you case freind try with a freinds clone zedbull for jujing
if problem is effi software problem or hardware ^problem

my device is buy by local resaler ,my hw is clasic zb , before that can`t find onother hardware hire only zb mini .. by the way i can`t trust to any china saler ...

[3abas27]

Toyota Yaris '08 (original key 4D-67). Added with the aid effi flight level one key (chip TPX2) everything works great! Checked chip EH2 works too (Everything works fine)!Sierra best

normally yaris 2008 work on 4d-70 not 4d-67 last year i did one toyota yaris petrol with add key manually to dump with 4d-70

[sierra]

normally yaris 2008 work on 4d-70 not 4d-67 last year i did one toyota yaris petrol with add key manually to dump with 4d-70

In EFfI in Image Generator page1 has data 32, 52, 92 ...
For this car will not go. On this can be done through ID 70

[badenaleks]

Here screen key

[synkrotronic]

Hi.
This program unlock id 48 and produce an reusable one?
Have zed bull clone but can not find programmer say divice not responding,and need to work on one key locked with id48.
First time using it.

Thanks and Regards

[sierra]

Have zed bull clone but can not find programmer say divice not responding...

What program you have tried? EFfI or the original software?
Which version of SW ZED-Bull?

[synkrotronic]

What program you have tried? EFfI or the original software?
Which version of SW ZED-Bull?

Soft sent by dealer v508.
Mini Zed Bull clone firmware 5.02.
Tryed with EFfi downloaded from post 8 ,but see the same information " Div. not responding".

Thanks

[3abas27]

Soft sent by dealer v508.
Mini Zed Bull clone firmware 5.02.
Tryed with EFfi downloaded from post 8 ,but see the same information " Div. not responding".

Thanks

setting port is correct?

[chli1976]

Works EFfi with Zedbull on PCF7936

[synkrotronic]

Yes,port is correct,plug and unplug divice and show open port.
Try in two pc?s,the same error and with difernt usb cables.
Programmer work fine alone,don?t know if zed bull connection damage

[3abas27]

Yes,port is correct,plug and unplug divice and show open port.
Try in two pc?s,the same error and with difernt usb cables.
Programmer work fine alone,don?t know if zed bull connection damage

DID YOU TRY HARDWARE WITH SOFT ZEDBUL ?
IF SAME ERROR?

PERHAPS YOUR HARDWARE PROBLEM