First start BDM100 (China) problem...

[dalishare]

I installed driver and CD with bdm100 china package
when i try to connect with ON button (DimSport 555pro delivered with CD) i have this errors messages with any ECU connected:

Firmware Revision: V.01 SN: 0258
. . . . . . . . . .
Interface communication error (E13)

MPC version error (E06): 0x00000000
Part number error (E05): 0x00000000
Power error or communication error (E14)


Is this normal ? or i need to connect ECU?

[radsky]

I installed driver and CD with bdm100 china package
when i try to connect with ON button (DimSport 555pro delivered with CD) i have this errors messages with any ECU connected:

Firmware Revision: V.01 SN: 0258
. . . . . . . . . .
Interface communication error (E13)

MPC version error (E06): 0x00000000
Part number error (E05): 0x00000000
Power error or communication error (E14)


Is this normal ? or i need to connect ECU?

You need to connect ECU .

[EDC16U1]

1CMD.jpgHi Guys,
I belive in search and found this old thread. My BDM100's Dimsport opening errors are same as the OP's image so i think I need to connect ECU.
CMD MPCProg:
Without connection to ECU
1st shot is of first opening. I dont hear any click or green light flashing as opposed to on Dimsport.
2nd shot is when I have chosen car model, an still no click sound or green light on. ON and OFF buttons are always greyed out as in sshots.
Is this normal? or do I need to need to connect to see its proper working function?
and which SW is better for EDC16U1 VAG, Dimsport or CMD?
Thanks