I tested also m8
Not working even with Original dll
Use an old version 2008 or 2009 and you will activate it with TAN
hello
I up this tread
very thanks ti impactops and wsc for test. this is very util option (free tan imput)
in dev mode one new menu is displayed in the sam ,and ecu motor units. is called FACTORY DIAGNOSTIC
I try to add equipament code K10 (DRIVELOCK) and P25 light packet and with this dll patch no ask for code for add equipament, and in dev menu, a special option called " equipament coding " , not run ,I change drivelock and light to active, write new configuration, and DAS display a error
8.561.6067
any solution to activate K10 AND P25 PACKETS?
Regards
I tested also m8
Not working even with Original dll
Use an old version 2008 or 2009 and you will activate it with TAN
Smart car engineer ,
Hello
I try to activate with 7.2007 with the option "add equipament code "" ask for the code for the car vin, I calculate the code with the TAN code calculator, but not active this option (K10 OR P25) the code is acepted , DAS go to the initial menu , but the funtion is not operative.
any solution? I make the procedure ok?
regards
What about SAM Asigment code? Can be done?
Hello guys a few days back i was informed that with Xentry 05/2012 the calculator are working fine without any changes!!
Where The Mind Goes, The Body Follows !!!
Of course you were informed and that calculator is going to cost them money right?So in other words you are promoting the calculator on the seller's behalf.There not stupid mate i'm pretty sure that there well aware that it exists
I'll tell you what that calculator doesn't do, infact all calculator won't do, new or old.When the technician uses their C4 tester to perform smart tan function, he or she has to open the calculator on the tester (or on a seperate pc), punch in the code in the calc using the software keyboard thats provided with star through the touch screen, then punch the result into das with the same software keyboard through the touch screen, while making sure there are no mistakes when entering the data so that DAS can perform the function.
By the time the technician has performed one smart tan function, the others have done 5 vehicles.
Regards
Impactops
No mate sorry i did'nt mention it but with the old calk those who all we have
did'nt work with old versions of das like 01/2012 or before 11/2011 now works fine i guess, until 05/2012.
I did'nt test it a friend of mine said to me that with 05/2012 the old calk is now working and will not update the das right now
for this reason.
Last edited by Gusk; 9th September, 2012 at 02:30 AM.
Where The Mind Goes, The Body Follows !!!
My file paths don't appear to be the same as everyone else's here, so I'm not sure I'm doing this correctly. I have placed the new CSD dll where I think the TAN exe is calling it, but it is still generating the same incorrect codes as with the old dll. What am I missing?
Hi
the csd.dll is not for TAN calculator softare is for DAS software, you need patch the DAS not the TAN calculator
Put the new dll in F:\Programme\DAS\smart , and not more TAN codes is necesary , only press F2
regards
Ahhh... so!
OK, it worked on the sim for me too -- now to try on a real car! Thanks again!
hi
i tested all functions and the patch is full functional
regards
What software can open and edit "csdsmart.dll" file?
thanks
chriskross (23rd November, 2013)
You can open it with winhex too , but it's not only the tool you open it with that's important
Bookmarks