DAS Smart Tan 5.2012 and 7.2012
Register
Page 1 of 11 123456 ... LastLast
Results 1 to 15 of 159
  1. #1
    V.I.P. Member
    impactops's Avatar
    Join Date
    Oct 2009
    Posts
    1,702
    Thanks Thanks Given 
    61
    Thanks Thanks Received 
    366
    Thanked in
    176 Posts

    Default DAS Smart Tan 5.2012 and 7.2012

    Extract file from Archive into F:\Programme\DAS\smart, make sure you backup the original.

    No code needed to be entered, just press F2
    It should work for all codes, i have only tested in sim mode

    Since the DLL has not changed with 7.2012, it also works with that version

    Pass:Qutomotive

    Regards
    Impactops
    Attached Files Attached Files
    Last edited by impactops; 3rd August, 2012 at 03:15 AM. Reason: Also works with 7.2012

  2. The Following 25 Users Say Thank You to impactops For This Useful Post:

    agan4ik (20th August, 2014), autodigitec (24th July, 2014), beongo (28th September, 2013), chulin (26th November, 2015), crappy44 (11th December, 2015), dar7914 (29th October, 2018), Darylwatkins (2nd August, 2017), dvdpgn (1st September, 2016), EagleOne2010 (10th September, 2013), Harlequin69 (20th January, 2018), JCoquenao (26th February, 2016), jimis (6th September, 2013), king kong (26th January, 2014), ktuning (15th October, 2018), Louislesinge (5th July, 2023), mcgustoo (6th September, 2013), nexia201 (16th May, 2016), Raod (4th September, 2017), rmkeizer (9th January, 2016), roma5000 (22nd November, 2017), t1tan1 (25th November, 2013), Wickybe (22nd August, 2016), xlb450 (8th August, 2023), yutaka yoshida (3rd September, 2022)

  3. #2
    DK Veteran

    Join Date
    Jan 2009
    Posts
    1,410
    Thanks Thanks Given 
    212
    Thanks Thanks Received 
    103
    Thanked in
    84 Posts

    Default

    not work, csd dll error

  4. #3
    DK Veteran wsc's Avatar
    Join Date
    Aug 2009
    Location
    GR
    Posts
    857
    Thanks Thanks Given 
    97
    Thanks Thanks Received 
    144
    Thanked in
    96 Posts

    Default

    Nop, wrong m8 ziko, the dll is working BUT it cant open the channel for key programming (thats i tested for)
    I mean that does not going to the procedure:"unlocking the unit please wait... etc.etc..."
    Smart car engineer ,

  5. #4
    V.I.P. Member
    impactops's Avatar
    Join Date
    Oct 2009
    Posts
    1,702
    Thanks Thanks Given 
    61
    Thanks Thanks Received 
    366
    Thanked in
    176 Posts

    Default

    Quote Originally Posted by wsc View Post
    Nop, wrong m8 ziko, the dll is working BUT it cant open the channel for key programming (thats i tested for)
    I mean that does not going to the procedure:"unlocking the unit please wait... etc.etc..."
    If you can be more specific, if i don't see the error in sim mode then i won't be able to fix it.If you can post or pm vin of vehicle used, also i found that with the old smart tan calc and no mods the codes generated for "Program key Transpoder" are accepted by das 5.2012.

    If you want to solve it also provide pics

    Regards
    Impactops

  6. #5
    DK Veteran wsc's Avatar
    Join Date
    Aug 2009
    Location
    GR
    Posts
    857
    Thanks Thanks Given 
    97
    Thanks Thanks Received 
    144
    Thanked in
    96 Posts

    Default

    here is some photos from the procedure

    Is missing one step from the procedure,the second step
    Attached Images Attached Images
    Last edited by PremierD; 24th July, 2012 at 02:30 PM.
    Smart car engineer ,

  7. #6
    V.I.P. Member
    impactops's Avatar
    Join Date
    Oct 2009
    Posts
    1,702
    Thanks Thanks Given 
    61
    Thanks Thanks Received 
    366
    Thanked in
    176 Posts

    Default

    As you can see the from the picture below, using the same vin number as the one displayed in your pics in sim mode, it completed the function

    I also tested the following for the same vin

    Activation of function "SOFTOUCH"
    Activation of function "Steering wheel gearshift"
    Activation of function "Cruise control"

    they all completed succesfully

    Regards
    Impactops
    Attached Images Attached Images
    Last edited by PremierD; 24th July, 2012 at 02:27 PM.

  8. #7
    DK Veteran wsc's Avatar
    Join Date
    Aug 2009
    Location
    GR
    Posts
    857
    Thanks Thanks Given 
    97
    Thanks Thanks Received 
    144
    Thanked in
    96 Posts

    Default

    the procedure is completed mate but without the second step(for the key learning that i tested) cant completed correct, the led does not flashing and the key not accepted
    I did not tested other functions
    Last edited by wsc; 24th July, 2012 at 11:20 AM.
    Smart car engineer ,

  9. #8
    V.I.P. Member
    impactops's Avatar
    Join Date
    Oct 2009
    Posts
    1,702
    Thanks Thanks Given 
    61
    Thanks Thanks Received 
    366
    Thanked in
    176 Posts

    Default

    the led does not flashing and the key not accepted
    How am i going to see that LED in sim mode?

    You need to explain the 2nd pic more thoroughly if you can, does it wait for you to press F3 cause from your pic it looks like it has been pressed.Can you test the other smart tan functions?

    can you also make video of procedure?

    Regards
    Impactops

  10. #9
    DK Veteran wsc's Avatar
    Join Date
    Aug 2009
    Location
    GR
    Posts
    857
    Thanks Thanks Given 
    97
    Thanks Thanks Received 
    144
    Thanked in
    96 Posts

    Default

    i know mate that you cant see the led if you have not a car .....
    i just told you that the procedure is incomplete
    Well: after the second pic and then ignition off a LED- switch which is located on "cockpit" is flashing and prepares the unit to accept the key by pressing twice the lock button...
    Thats all the procedure...

    I will test and other functions and let you know,maybe and in Day
    Smart car engineer ,

  11. The Following User Says Thank You to wsc For This Useful Post:

    Greck81uk (25th August, 2016)

  12. #10
    DK Veteran wsc's Avatar
    Join Date
    Aug 2009
    Location
    GR
    Posts
    857
    Thanks Thanks Given 
    97
    Thanks Thanks Received 
    144
    Thanked in
    96 Posts

    Default

    Hello again
    Tested tempomat-> ok
    Tested steering gear shift-> ok
    Tested softouch -> ok
    Tested again key learning-> not ok
    Last edited by wsc; 24th July, 2012 at 04:42 PM.
    Smart car engineer ,

  13. #11
    Moderator
    PremierD's Avatar
    Join Date
    Jun 2009
    Posts
    12,456
    Thanks Thanks Given 
    2,630
    Thanks Thanks Received 
    9,122
    Thanked in
    4,299 Posts

    Default

    2 out of 3.. (for now) is better than a poke in the eye with a sharp stick mate ..

  14. #12
    V.I.P. Member
    impactops's Avatar
    Join Date
    Oct 2009
    Posts
    1,702
    Thanks Thanks Given 
    61
    Thanks Thanks Received 
    366
    Thanked in
    176 Posts

    Default

    Quote Originally Posted by wsc View Post
    Hello again
    Tested tempomat-> ok
    Tested steering gear shift-> ok
    Tested softouch -> ok
    Tested again key learning-> not ok
    Thanks for the testing WSC.

    I believe there are other issues in play here, if i try to "Add or remove equipment code" just by pressing F2 the vin number displayed on the top right hand corner is altered.If it writes this to the vehicle/module then you will have a severe problem.i have made changes to the key learning section which i believe should work, but since the functions that are not working at the moment rely on information from the code entered it may do more harm than good.

    If you want to try it either way just tell me and i will post it, also the mod below appears to still work with 5.2012

    http://www.digital-kaos.co.uk/forums...2011-a-202960/

    Regards
    Impactops

  15. #13
    DK Veteran wsc's Avatar
    Join Date
    Aug 2009
    Location
    GR
    Posts
    857
    Thanks Thanks Given 
    97
    Thanks Thanks Received 
    144
    Thanked in
    96 Posts

    Default

    i have not problem mate let me know and i will test it as soon as possible
    Smart car engineer ,

  16. #14
    V.I.P. Member
    impactops's Avatar
    Join Date
    Oct 2009
    Posts
    1,702
    Thanks Thanks Given 
    61
    Thanks Thanks Received 
    366
    Thanked in
    176 Posts

    Default

    I have modified the key Learning routine, use at own risk

    Since the DLL has not changed with 7.2012, it also works with that version

    Pass:Qutomotive

    Regards
    Impactops
    Attached Files Attached Files
    Last edited by impactops; 3rd August, 2012 at 03:16 AM. Reason: Also Works with 7.2012

  17. The Following 27 Users Say Thank You to impactops For This Useful Post:

    alelaskaris (12th January, 2024), angel22272 (17th February, 2020), baltazar3 (18th March, 2016), benojoel (22nd July, 2020), cdex (10th December, 2013), chanodaniels (21st April, 2017), Dan114 (29th February, 2016), elephantul (28th July, 2013), EwellG (4th November, 2013), fpschris (30th May, 2020), giuseppe1374 (15th December, 2013), hatimtai (14th August, 2016), Idy (18th March, 2024), joebree (26th February, 2018), kuni92 (22nd November, 2015), mcgustoo (6th September, 2013), nikolakismb (18th August, 2016), olegario (8th May, 2023), roadsterptpt (1st September, 2016), rudi888 (31st May, 2022), RUSLAUTOEL (22nd March, 2018), speedservice (30th August, 2018), tadin (8th February, 2019), teris (23rd November, 2013), terymech (13th June, 2018), tommet (2nd January, 2016)

  18. #15
    DK Veteran wsc's Avatar
    Join Date
    Aug 2009
    Location
    GR
    Posts
    857
    Thanks Thanks Given 
    97
    Thanks Thanks Received 
    144
    Thanked in
    96 Posts

    Default

    i am here again
    Tested key learning smart 450-> OK
    Tested key learning smart 451-> OK
    Tested key learning smart 454-> OK

    Not tested yet add or remove equipment codes ....
    Last edited by wsc; 26th July, 2012 at 04:23 PM.
    Smart car engineer ,

 

 
Page 1 of 11 123456 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.