Digiprog 3 clone questions and answers

**eliaselias** · 24th March, 2017, 02:17 PM

Originally Posted by ajcosta1

Need help

I buy a Digiprog but doesn?t work in k-line and Can bus cars.

Anyone have ideas?

thanks

hello how are you ... in which car it did not worked?

**ajcosta1** · 24th March, 2017, 08:46 PM

Originally Posted by eliaselias

hello how are you ... in which car it did not worked?

GOLF IV K-line
TOLEDO I 2001 K-line this has been tested with VAg TACHO in past and worked well
A3 8p 2006 CAN

In all three have the no connection error

**Darko88** · 27th March, 2017, 01:22 PM

Same as i buy from obd2cartool, this price is too much. v4.94 is a clone one, for me it is ok. digiprog orignial more than 1000usd.

**niallr** · 27th March, 2017, 01:48 PM

Hi. .. my digi 4.94 has started messing about.. first problem was 2009 b8 a4. Doesn't read old km and doesn't change km but still asks to check written value. (Worked on a b8 in the past) other car was 2004 told didn't read old value (?) And again didn't write new value.. select a golf of the same year and didn't read old value (? Again ) but did write new value. Then today I tried 2003 bora and doesn't read old value and when writing is says something like read backwards from 0fff 0x0. And doesn't write... have had this tool over a year and worked perfectly on 100s of cars reading old and writing new without problems. Anyone had the same problem? Maybe soldering or bad chip? Always been stored in a shock proof case.

Sent from my SM-G900F using Tapatalk

**Darko88** · 28th March, 2017, 03:30 PM

Hi,there has somebody do hyundai i30 2016 KM successful?

**centralinas** · 29th March, 2017, 11:15 PM

Hi,can you spare the code for gal,mine dead,got new one but no code for it,please,thanks.

**fbmw** · 1st April, 2017, 01:36 AM

Hi, anyone have experience with BMW E60/E61 year 2007 CAS3?
What about 2008-2009 CAS3+?

**XmoDDeR** · 1st April, 2017, 02:07 AM

if updated u would have better luck making yellow snow in sibera

**Joeyfast13** · 1st April, 2017, 05:27 AM

2006 Sierra
2006 2.jpg

This is where im supposed to hook my clip on correct?
I went through my list on my manuals under Chevrolet but have not yet found it showing exact location.
What type is the chip to read it? I know its a alcatel 25020 chip.
Im still fighting to get my tool to work in circuit but i can desolder if need be. Can i program hours as well?
Thanks Guys

**clusters** · 1st April, 2017, 06:30 AM

Yes that is the right chip, use Avalanche to program the mileage. Then Hummer H2 -2007 for the hours. It's an S95P02.

Search the forums for Silverado and you will find tons of info.

**Joeyfast13** · 1st April, 2017, 02:23 PM

Thanks clusters. I defiantly did look but but all I found was the silverado clusters with the shift indicator readout when I had the light indicator! Just wanted to make sure as I couldn't find it in my manuals! Is there a guide that tells me what type to read different eeproms?

**zix1** · 8th April, 2017, 07:46 AM

Hey guys,
I would like to do a w203 from 2000 with DP3.
Correct milage with st60 is enough or has to be done more steps? Like ignition or ezs...
It doesnt have to be a clean job. It just needs to show corrected milage in cluster.

**honingkoning** · 9th April, 2017, 11:37 PM

Originally Posted by zix1

Hey guys,
I would like to do a w203 from 2000 with DP3.
Correct milage with st60 is enough or has to be done more steps? Like ignition or ezs...
It doesnt have to be a clean job. It just needs to show corrected milage in cluster.

I remember you in a E46 topic, telling the helping guys that No one gives good answers to your question !!!!

So No help from me.

Good luck

**zix1** · 10th April, 2017, 08:38 AM

Originally Posted by honingkoning

I remember you in a E46 topic, telling the helping guys that No one gives good answers to your question !!!!

So No help from me.

Good luck

yes but it was my fault because I was confused about the procedure. Since I ve done some BMWs now, I understand a little bit more about the work.
Don't be mad, everybody speaks and understands English in a different way. We aren't all native english people. So sorry mate.

**memet99600** · 10th April, 2017, 09:03 AM

Originally Posted by zix1

yes but it was my fault because I was confused about the procedure. Since I ve done some BMWs now, I understand a little bit more about the work.
Don't be mad, everybody speaks and understands English in a different way. We aren't all native english people. So sorry mate.

Yes you're right it's your fault, people want to help you and answer to your questions but if you change you question all 5 minutes we can't help you. Use search function and you will see a lot of result for this car !