Digiprog 3 clone questions and answers

[Alexxelax]

Okey since nobody had any clue i come with a update, the cluster was defect, so my question now is did the digiprog kill it? Why do they kill volvo clusters?

[teerak2uk]

Okey since nobody had any clue i come with a update, the cluster was defect, so my question now is did the digiprog kill it? Why do they kill volvo clusters?

Some of the leads are not wired correctly so could be that or used the wrong cable

[Alexxelax]

Some of the leads are not wired correctly so could be that or used the wrong cable

Thanks for replying.

From the beginning i may have soldered wrong, but used the 51 dongle. Will some faulty soldered wires kill the cluster instantly? And is it because of that some say that not use digiprog on volvo cluster?

I am going to buy another cluster to try on again, so all tips and advises will be appreciated.

[teerak2uk]

Thanks for replying.

From the beginning i may have soldered wrong, but used the 51 dongle. Will some faulty soldered wires kill the cluster instantly? And is it because of that some say that not use digiprog on volvo cluster?

I am going to buy another cluster to try on again, so all tips and advises will be appreciated.

Soldering incorrectly can kill it and I've done a few older Volvo's without a problem just check connection s inside cable 25 way plug

[jjservice]

PLUG 51 has a SUPPLY 12V and PLUG 48 has a SUPLY 5VOLTS... maybe tha dash was dead you did solder wrong suply voltage which is 12volts...

Okey since nobody had any clue i come with a update, the cluster was defect, so my question now is did the digiprog kill it? Why do they kill volvo clusters?

*jjservice*

[jjservice]

The plug 51 and plug 48 has a different color if your digiprog is clone.... if the digiprog is clone the wires colors is not same from the original plug 51 has ORANGE/BLACK/BROWN/RED and the plug 48 as well same color but not the same pin out of the 2 wires.... only the 12v and 5v.

Hi all.

I need help with Volvo v70 2005, i have solderd and colour code converted adapter 51 and also tried with 48, i get "INIT ERROR", i have check and re-checked connections but cant find anything.

Do i need to connect the dash to car and then do Digiprog?
Do i need to program the digiprog unit by PC or so before using it?

I have also tried HC12 and HCS12 both give same "INIT ERROR"

*jjservice*

[Alexxelax]

The plug 51 and plug 48 has a different color if your digiprog is clone.... if the digiprog is clone the wires colors is not same from the original plug 51 has ORANGE/BLACK/BROWN/RED and the plug 48 as well same color but not the same pin out of the 2 wires.... only the 12v and 5v.

Thanks for answer

Yes i have a clone.
I found the colour codes, and after searching online i found some other guides that tell the colour codes original vs clone.

I used 51 as manual said but when not working i tried with 48 but still nothing, the cluster clock just come on very little. After all i installed in car and it did not work anymore, so i started to check soldering but nothing.

The biggest question is have the digiprog fried the cluster? If yes, why did that happen, was it my fault or is the digiprog not compatible with volvo clusters? And is soldering wrong cables so dangerous to damage cluster?

[Alexxelax]

PLUG 51 has a SUPPLY 12V and PLUG 48 has a SUPLY 5VOLTS... maybe tha dash was dead you did solder wrong suply voltage which is 12volts...

*jjservice*

My manual say use 51 on volvo v70, and the volvo s80 uses 48

My car is 2005 v70

[jjservice]

My manual say use 51 on volvo v70, and the volvo s80 uses 48

My car is 2005 v70

Well maybe you had a wrong connection s0ldered wires.

*jjservice*

[rtbdiagnostic]

can digiprog read and write this 93c86 eeprom form 2017 ford everest / ranger see image seems like latest sc667351 version
this is dash with 2 x lcd screens on both sides of the speedometer in middle
tried and only got chip error - luckily no data erase soldered chip back old mileage intact - what tool recommended to read write this 93c86 chip

[bersch8688]

You can use Digiprog every time as EEPROM Programmer
You can load after read to PC and edit and send edit EEPROM file back to Digiprog and write with EEPROM clip back.

For good read EEPROM, every time desolder and read.
Dont read in curcuit EEPROM ;-)

[brend]

Absolutely right!!!

You can use Digiprog every time as EEPROM Programmer
You can load after read to PC and edit and send edit EEPROM file back to Digiprog and write with EEPROM clip back.

For good read EEPROM, every time desolder and read.
Dont read in curcuit EEPROM ;-)

[rtbdiagnostic]

amarok not working 4.94 and 4.88

i also tried a 2015 Amarok no success

[letalcrudo]

I've tried on Amarok from 2011-2015... I had success on 8/10 ... V4.88
IMG_20181008_131507.jpg

[wbart]

Hallo my digi no Read 95160. Any Solutions?

Wysłane z mojego SM-G390F przy użyciu Tapatalka