Digiprog 3 clone questions and answers

**gaversa** · 18th August, 2012, 08:39 PM

Hi here I leave you the zip entirely of digiprog greeting

DIGIPROG_Manual_For_reference_only.rar

**diagnoza_auto2000** · 19th August, 2012, 05:48 AM

Tested on CAS2 direct can conection

Get vesion number then Unknown version,then get 0 and all exit

Try to read 24c64 eep ,then bloked,need to power off

I will not test that tool on 212 even with my backups made by AVDI!

Even if you can do dash ,you can never make assyst and all others location,and after odo correction you get on dash Service A,B,C .... and you cannot reset even with Xentry!,if you not make the Assyst
Even on 211 you cant make assyst by OBD.

All cables not look as in the picture,sow working with this tool its make you nervous.
Many cables is mising HC12 dongle for exemple.
Key reader....
If you make mercedes 212 how do you save the dash content?
Or CGW eprom?
You guys know if one 212 CGW will f....k with this chinese tool then you will lose evrithing,and only dealer or good tool will wake up it?

Who work with this tool,will destroy lot of dash and boys with good tools (enigma,dashcoder,Avdi,DP3) will charge lots of money for repair

Regards

**rukartinatv** · 19th August, 2012, 06:10 AM

Originally Posted by diagnoza_auto2000

Tested on CAS2 direct can conection

Get vesion number then Unknown version,then get 0 and all exit

Try to read 24c64 eep ,then bloked,need to power off

I will not test that tool on 212 even with my backups made by AVDI!

Even if you can do dash ,you can never make assyst and all others location,and after odo correction you get on dash Service A,B,C .... and you cannot reset even with Xentry!,if you not make the Assyst
Even on 211 you cant make assyst by OBD.

All cables not look as in the picture,sow working with this tool its make you nervous.
Many cables is mising HC12 dongle for exemple.
Key reader....
If you make mercedes 212 how do you save the dash content?
Or CGW eprom?
You guys know if one 212 CGW will f....k with this chinese tool then you will lose evrithing,and only dealer or good tool will wake up it?

Who work with this tool,will destroy lot of dash and boys with good tools (enigma,dashcoder,Avdi,DP3) will charge lots of money for repair

Regards

from what website did you buy your tool?
I try ford obd work ok.

**diagnoza_auto2000** · 19th August, 2012, 06:35 AM

I don t test on Ford my friend.
Ford can make many chep tools!

**carradio2001** · 19th August, 2012, 08:45 AM

Astra-j (2009) works OK via OBD
VW Passat 2007 works OK via OBD
Astra-H works OK via CHIP
Audi A8 2007 works OK via OBD
Ford C-Max and S-Max work OK via OBD
Ford Fiesta & Focus works OK via MCU, not Dash Connector ?!?!
Golf 3 & Golf 4 works OK via dash connector and via OBD
Reading 93Cxx, 24Cxx, 95xxx, 912, 9s12 works OK.

That's for the moment ....

Carradio2001.

**diagnoza_auto2000** · 19th August, 2012, 09:06 AM

Originally Posted by carradio2001

Astra-j (2009) works OK via OBD
VW Passat 2007 works OK via OBD
Astra-H works OK via CHIP
Audi A8 2007 works OK via OBD
Ford C-Max and S-Max work OK via OBD
Ford Fiesta & Focus works OK via MCU, not Dash Connector ?!?!
Golf 3 & Golf 4 works OK via dash connector and via OBD
Reading 93Cxx, 24Cxx, 95xxx, 912, 9s12 works OK.

That's for the moment ....

Carradio2001.

How do you read 912 ,9s12? WIch adapter use?

**batandball** · 19th August, 2012, 09:37 AM

Originally Posted by diagnoza_auto2000

Tested on CAS2 direct can conection

Get vesion number then Unknown version,then get 0 and all exit

Try to read 24c64 eep ,then bloked,need to power off

I will not test that tool on 212 even with my backups made by AVDI!

Even if you can do dash ,you can never make assyst and all others location,and after odo correction you get on dash Service A,B,C .... and you cannot reset even with Xentry!,if you not make the Assyst

Even on 211 you cant make assyst by OBD.

All cables not look as in the picture,sow working with this tool its make you nervous.
Many cables is mising HC12 dongle for exemple.
Key reader....
If you make mercedes 212 how do you save the dash content?
Or CGW eprom?
You guys know if one 212 CGW will f....k with this chinese tool then you will lose evrithing,and only dealer or good tool will wake up it?

Who work with this tool,will destroy lot of dash and boys with good tools (enigma,dashcoder,Avdi,DP3) will charge lots of money for repair

Regards

I know it does merc assyst your options are days and mileage for service it takes about 10 min for assyst to complete
did you change 9 Dway ?

**carradio2001** · 19th August, 2012, 09:37 AM

Originally Posted by diagnoza_auto2000

How do you read 912 ,9s12? WIch adapter use?

ST 48
White= + 5V
Brown = GND
Green = Reset
Yellow = BCKGND

Carradio2001.

**diagnoza_auto2000** · 19th August, 2012, 09:55 AM

and you read cas2 with 4 wires with digiprog?
Tested now not WORK!

**diagnoza_auto2000** · 19th August, 2012, 10:04 AM

Ok lets test by direct CAS conection
PS:Guys i just play for tests !
Wich is the conector for BMW CAS ALLE ?
ANd how you conect?
I mean this one

**batandball** · 19th August, 2012, 10:04 AM

Originally Posted by diagnoza_auto2000

and you read cas2 with 4 wires with digiprog?
Tested now not WORK!

No thats for things like nissan navara, old ford modeo, pug 912 bsi, and most of new fords but new fords go via OBD

**diagnoza_auto2000** · 19th August, 2012, 10:07 AM

ok sow CAS and EZS canot read?
Btw in menu for 221 get mesage (use can blocker)

**carradio2001** · 19th August, 2012, 10:09 AM

Connector BMW CAS ALLE not exist on Digiprog 3 clone cables !

Carradio2001.

**diagnoza_auto2000** · 19th August, 2012, 10:11 AM

Thats good news ,cause by dash conector tested and not work.

**batandball** · 19th August, 2012, 10:11 AM

Originally Posted by diagnoza_auto2000

Ok lets test by direct CAS conection
PS:Guys i just play for tests !
Wich is the conector for BMW CAS ALLE ?
ANd how you conect?
I mean this one

That lead did not come with my machine some one gave me wiring diagram for it but it dint work (dont know if it was correct wiring or not)
but it did not damage cas 3+