Carprog reprogramming - final solution

**cttorque** · 19th September, 2013, 12:50 AM

Please can some body explain how this program work?carprog tool.JPG

**autocargo** · 19th September, 2013, 08:28 AM

Looks interesting.... Why don't you upload it here... I'm sure we could come up with something...

**meteor80** · 19th September, 2013, 11:44 AM

Originally Posted by cttorque

Please can some body explain how this program work?carprog tool.JPG

This program is FAKE.

**r_parev** · 29th September, 2013, 01:08 PM

Is this jtag ok for the job JLINK J-LINK V8 Emulator ARM7 ARM9 ARM11 Cortex-M3 ADS IAR STM32 JTAG | eBay

**AGK** · 30th September, 2013, 01:08 PM

J-link a good programmer.

**Pakli30** · 4th January, 2014, 03:46 PM

one USB claimed countdown?

**bodzio012** · 10th January, 2014, 11:35 AM

Somebody know the is new version ? In china website are 5.31?

**EduardNN** · 24th January, 2014, 10:42 PM

Reflash AT91SAM7S256 programmers can by using the integrated USB bootloader and software from ATMEL - SAM-BA.
Need at the time of programming to replace quartz 18.432 MHz. Close shorted to ground pin55 - erase (to erase the memory), then shorted to ground pin 40 - TST (to upload firmware loader) CarProg connect to USB, the device should appear atm6124.Sys ATMEL AT91xxxxx Test Board. Set at91-isp, run SAM-PROG and fill firmware.
Return to the place 12MHz quartz and check the work.

**jomberykaso** · 28th January, 2014, 05:10 AM

How can i make to reflash my CARPROG clone v4.01?,
i need the pinout for my programmer, could you tell me How can i make it please?

**EduardNN** · 28th January, 2014, 12:21 PM

Something like this ....
Could he look ...

**Dunker** · 31st January, 2014, 09:26 PM

Originally Posted by r_parev

Is this jtag ok for the job JLINK J-LINK V8 Emulator ARM7 ARM9 ARM11 Cortex-M3 ADS IAR STM32 JTAG | eBay

Don't buy from this clown. link-delight is a rip off. Bad comms and item doesn't turn up !!!

I eventually got one from a seller on Aliexpress.

P.M. me and I'll find which seller I usedf.

**jomberykaso** · 11th February, 2014, 02:53 AM

MATES HERE IS THE SOLUTION, VERY EASY. THANKS TO DK MEMBERS SASHXXX AND IUSTIN73 FOR THEIR USEFULL POSTS, THEY SAVED MY CARPROG 4.01 CLONE. SORRY FOR MY ENGLISH.

Originally Posted by iustin73

I welcome all those interested in carprog reflash yesterday I managed to recover carprog with a simple interface all you need f 5 100 ohm resistors and coupling scheme. no need to ***l at88 100% worksAttachment 217976
100_OHM_jTAG.jpg

Originally Posted by sashxxx

100% working
My stetings
Attachment 221208

setings2.JPG

**xtech** · 11th February, 2014, 09:54 AM

For 4.1 beter use :http://www.digital-kaos.co.uk/forums...24/index2.html

**Dacha** · 21st June, 2015, 04:36 AM

Does anyone have a solution to repair CAR PROG interface. After re flashing ARM V4.74 has no connection to USB!

AT88SC25616 read damp with proper interfaces with elnec bee prog!