ford lock 13 reset tool

**gu3ss** · 21st October, 2017, 10:21 PM

Originally Posted by shooting

No, either post dumps or use tool, both need a tool of some sort

wbr

What do you mean by dumps... Anyone out here , willing to tell a newbie how to make a reset tool for his own? What microcomponents to buy and so on, i have some minimal knowledge about them but not so big, futher more even i know radiochip tool would work, i don't have 55euros to buy it and cuz is sent from polan i don't trust with the shipping

**shooting** · 21st October, 2017, 11:07 PM

Originally Posted by gu3ss

What do you mean by dumps... Anyone out here , willing to tell a newbie how to make a reset tool for his own? What microcomponents to buy and so on, i have some minimal knowledge about them but not so big, futher more even i know radiochip tool would work, i don't have 55euros to buy it and cuz is sent from polan i don't trust with the shipping

If you don't have the tools then to buy them will cost more than 55euros,
maybe best take it to your local decoder to solve

wbr

**gu3ss** · 25th December, 2017, 10:55 PM

Originally Posted by shooting

If you don't have the tools then to buy them will cost more than 55euros,
maybe best take it to your local decoder to solve

wbr

Bad part, in romania i didn't find one in my city, and i don't trust to send them in another city... and i would like to make one for myself.. microprocessor are easy to find... but the knowledge to build the whole set is not for everyone and i would like to learn

**monir99** · 19th February, 2018, 09:17 PM

yyyyyy

**marcosjdm** · 25th February, 2018, 03:18 AM

Hi. I also want to build the unlocking tool.
I have a lock13 with micro: 760138BFKC002, which looks like TEXAS I. No tools is able to read this MCU CRYPTO.
Any progress?
Thank you

**xdjey** · 3rd December, 2019, 07:15 AM

What new with device for unlock caraudio ford 3000,4000,5000 series???

**opaladoeverton** · 29th September, 2023, 02:21 AM

Originally Posted by ficho

HI,
Reset tool can be figured out in less then 15 min, needed components:

1. Reset Tool (Lock13 ETL or some other)
2. Radio that is Locked and Reset is done via I2C (Ford 3000 ...)
3. Radio that is Lockedand Reset is done via RS485 (or serial direct on mcu, Ford5000...)
4. Logic analyzer
5. sniff unlocking sequence on first & second radio
6. Draw some schematic (pic,avr,arm...) or copy the board you are using.
7. Write your code.

This is much faster then analyzing some hex that you have found or what ever...
I have attached some pcb doc if someone wants to make he's own reset tool hardware (I suggest you to use a microcontroller that has hardware i2c and usart).

Happy Lock 13 unlocking ...

regards ficho

hello plug.
You attach a photo of the reset lock 13 pcb but the top part of the pcb is missing and which electronic components we should use, do you have information about the rest of the missing parts?