Did anyone notice that when you read unlocked MCU and than lock it and read,you will notice that last two lines are not readed.
Same is with Rosfar also.
Did anyone notice that when you read unlocked MCU and than lock it and read,you will notice that last two lines are not readed.
Same is with Rosfar also.
I think is software problem this.
If my post was helpful than Please don't forget to press the Magic word
smokey08+ you have mail ...
He is .. ****er wont leave me alone ..
Link is dead. Can you upload again?
Best regards
Link is OK now, try again.
If my post was helpful than Please don't forget to press the Magic word
abdullah60 (3rd January, 2014), butugan_mihai (15th April, 2013), mohamedkey (1st June, 2015)
good partage my xprog-m clone it work
thanks
Yes, link is woking. Thanks
this works 100%
top man user2468
thank you
user2468 thanks a million
Go for it. The future is promised to no one
Thank you user2468!
Your solution is work! I confirm success of this solution. Good work.
All the best!
hi friends
have you tested v53 ?
my xprog 4.5 clo, stop work by (com) port but by USB can read 24c02 but not read MCU"s like hc11 !
find this ST202BD and I think is the problem !
Max232ESE is the same isin"t ?!
any one have the same problem, or could help in this please ?!
BR
My work is my life ART TECH GARAGE
Bookmarks