XPROG Clone Repair

**philipcoin** · 11th January, 2015, 05:36 PM

hello mates,
i have xprog M,It says communication error.
i download this xprog repair and repair my xprog now its says.
DEVICE IS SILENT NO LIGHT FLASH OR BLINK ON THE XPROG.
HAVE CHECK THE ENVIROMENT AND CHOOSE THE RIGHT USB PORT.
any help.
thanks,
best regards.

PC.

**emmanueladingra** · 6th April, 2015, 11:01 AM

hi my friens please i also want a tutorial to repair my clone but i can not dowload the tutorial you are posteg please help me i want this solution

**flixuno** · 26th April, 2015, 06:54 PM

hi
My xprog is 5.50
everything installed fine
Error reading eeprom and mc
want to upgrade, how to solve?
sorry for my English
thanks

**serg2000** · 26th April, 2015, 07:24 PM

558 is aviable
sorry for my English

**flixuno** · 26th April, 2015, 07:40 PM

Chinese clone is
update = blockade
how to solve?
thanks

**pablobonome** · 25th May, 2015, 03:06 PM

hello serg2000
I need your help.
My English is not very good.
my xprog asks me to register my hard .
and is a Chinese clone .
How I can make it work ?
ls version that I have is the 5.50
place another previous firmware versions .
when I want to read a device, asking me to update it.
once asked me updated record hard .

I have the upa 1.3 with which the firmware eh recorded in the hard id guines I just listed .

**Holtek** · 26th May, 2015, 02:08 PM

Fatal Error #14391 mean that the ATmega64 in the Xprog is not secured (lock bits LB1, LB2 is not programmed) so hardware registration in this case impossible.
Only way is use any ATmega64 programmer, write lock bits LB1, LB2 and retry xprog registration.

Best regards.

**pablobonome** · 26th May, 2015, 02:53 PM

Hello , I'll try .
thank you very much

**pablobonome** · 26th May, 2015, 09:26 PM

Hello friend !!! HoltekI worked !!!

tranks!!!

**pablobonome** · 27th May, 2015, 08:28 PM

hi , how are you?
Certificade

update what is ?

**episcop** · 30th May, 2015, 01:25 PM

Have problem with soft 5.51 don't start... Starting, have screen with logo Luis Andre, starting loader, decripting, running....and Windows close programm with error. Win7-32bit, antivirus 360"-off

**pablobonome** · 30th May, 2015, 08:02 PM

hi , the x -prog now works even with antivirus .
My question is this :
if I click then updated certificate , you can return block x -prog ?

**episcop** · 30th May, 2015, 10:06 PM

I don't update this, after writing atmega(flahs, eeprom, fuses, lockbits), and start soft by Luis, update firware of xprog and all recognised whell, If you interesting this "faso isso amaha" and post.

**u.s** · 31st May, 2015, 07:20 AM

Originally Posted by episcop

Have problem with soft 5.51 don't start... Starting, have screen with logo Luis Andre, starting loader, decripting, running....and Windows close programm with error. Win7-32bit, antivirus 360"-off

Are you using Adobe acrobat 10?