Usually when battery goes flat on daewoo/chevrolet, the immobox goes out of synch with engine ecu. Use MVPpro to re-synch immobox to engine ecu. If you havent tried already m8
Hi to all
Is possible to synchronize this two keys directly in to dump file, ready to start?
Those keys are original from the car but dosent work, the car was dead batery and now dosent start because of immo.
I have try to re-synchronise with MVP but not work.
Here dump file from immobox and ID keys;
Remote key B6 43 AE 23 AF 65 87 65
Normal key B6 42 1E 8F A3 7D 87 65
Many thanks
BR
Jose
Usually when battery goes flat on daewoo/chevrolet, the immobox goes out of synch with engine ecu. Use MVPpro to re-synch immobox to engine ecu. If you havent tried already m8
You need every tool in the book, to do this auto locksmith job.
frist all fuse and try synchronise with sbb
check all fuse and rely
post a picture of immo box, i just done one like this and dump was corrupt, you need good dump and re sync ecu with mvp, add your old keys with zed.
ill make you a good dump later....
ninja
Last edited by ninja123; 12th February, 2013 at 09:23 AM.
DK- The Bogs Dollocks!!!
NEVER SAY IT CANT BE DONE!!
The thanks button works wonders!!
DONT SEND ME PM'S ASKING FOR OTHER MEMBERS WORK OR PASSWORDS
try this dump, then do learn procedure with mvp, then re fit obd plug cover before starting.
ninja
Last edited by ninja123; 12th February, 2013 at 09:00 PM.
DK- The Bogs Dollocks!!!
NEVER SAY IT CANT BE DONE!!
The thanks button works wonders!!
DONT SEND ME PM'S ASKING FOR OTHER MEMBERS WORK OR PASSWORDS
ashraf2000 (8th June, 2019), foxx (26th August, 2021), webastocu (14th February, 2020)
Hi friend
I have try, but no succes, MVP find immobox, but when i try to adapt keys keep saying " please wait ..trying to comunicate.... " for long time and dont make anything.
What do you thing aboat this?
BR
Jose
transponer tip : 48
id:1.key B6 43 AE 23
id:2.key B6 42 1E 8F
If the data they need to work towards try
information sharing
Here is example for key and immobilizer dump.I had problems and I solvet it after replacing 93c56.Some programmers read 93cXX swaped.
Synchro with T300
Hi friends
I will try and give report
BR
Jose
Bookmarks