simple
make it virgin and initial startup with Xentry
simple
make it virgin and initial startup with Xentry
Smart car engineer ,
hello, can you tell me how i can make it virgin? thanks a lot!
You can either clone the original to the donor, or you can program with das, you just need pin code i believe to program keys
auto ele (8th April, 2015)
Yes you can clone it - if the mcu is not destroyed you can read it ,and flash the new one SAM or desolder the old one MCU and put it on the new donor -if it OK .
But if you start to program the new one you will need the pin to adapt the keys .
Chiptuning/DPP/EGR/LAMBDA(O2)/FLAPS/Adblue/DTC OFF / EDC17 Immo OFF
Kess v2 eu. clone full/Ktag eu. Clone 6.070 full
Info on pm
Kess v2 ori , K-tag ori, MAGPro2 x17, Galleto v54 EU ,Winols ,AVDI full ori, Orange 5 /Omega /Xprog/Upa all ori , VAS Pc , Porsche PIWIS 2 and etc........
So you just change the MCU???
Bookmarks