Guide: Flashing a Dreambox with Dreamup

[piopat]

Which image is the best one for the 500C???
BR Kev

a dm500c is for cable (the c stands for cable) so the dm500c will be of no use unless you have access to a private cable server and even then you likely wont be using cccam .

[toonarmy1]

hi i just got a blackbox 500s flashed the box with D.K 1.1 img, when i scan for channels all that comes up are the transponders and no services any help would be appreciated am stuck

[piopat]

if you click on the last link of my signature area (near the bottom of this post ) you can download a good image called nabilo maxvar v8 ,i recommend you flash your box with it .

[hale15]

Great ! Thanks.

[webrunner101]

hi all
im new to the site and to flashing dreambox. i got the dreamup file but im not sure wot image i need? i have a dm500c any help to point me in the right way would be great many thanks webrunner

[EAMO 2]

hi all
im new to the site and to flashing dreambox. i got the dreamup file but im not sure wot image i need? i have a dm500c any help to point me in the right way would be great many thanks webrunner

Would recommend D.K.1.1 or older PLI-Jade image as newer Pli-Jade images have limited range of Symbol Rates in Auto-Scan mode
In SG/Sta*hub areas Dreambox will clear channels if using correct
settings. In UK/Eire (Nagra3) regions card/share is required to clear
encrypted channels

[Salla6ue]

hi, can anyone advise me if i need to power on the dm500c to green led or just standby red led when flashing with dreamup? thanks.

[EAMO 2]

hi, can anyone advise me if i need to power on the dm500c to green led or just standby red led when flashing with dreamup? thanks.

Remove Dreambox power lead before clicking CONNECT on Dream-Up loader. Re-connect power lead to Dreambox when prompted

[Salla6ue]

Remove Dreambox power lead before clicking CONNECT on Dream-Up loader. Re-connect power lead to Dreambox when prompted

i've done that, it's just that my dm500c can only power up to standby mode and dreamup don't seem to be able to detect it...

[EAMO 2]

i've done that, it's just that my dm500c can only power up to standby mode and dreamup don't seem to be able to detect it...

Never claim to be an expert but if you cannot get green led to light up you either need to J-tag Dreambox or replace faulty component
If box is DM500 clone be better to buy new box

[Pjang]

can you help me. How to download dream up into Mac?

[billa79]

Guys

im needing help. got a blackbox 500s and has openpli image on it. got the box from bradford and using it in glasgow.

pictures freezes at times and wanted to know how would i change the image and what image is good and what tools i need?

i believe reading few posts that nabilo maxvar v8 is the image for my box?

i have all paid channels on my box and would like to continue with them after new image so any help would be great.

[piopat]

hi billa i just replied to your pm have a look in your inbox mate .

[clifet]

been having problems with this dreamup

[piopat]

what box do you have and what version of dreamup are you using , i know some say that some versions of dreamup are universal to all boxes but i think its better to use the version designed for your box .