VCSD----Repair your vcds step by step

[kire106ka]

Post too old deleted

[sagajulian]

thanks for de help

[kire106ka]

I need to know if these procedure works for some of you a friend confirmed that works on 11... he manage to repair after interface blocket from rostech update

[mishu_b]

...
I can't see Atmega162 dumps.
Could you please tell us - how we will reprogram the uC? and with what?

[kire106ka]

deleted too old procedure

[slobodynuk]

***1089;***1087;***1072;***1089;***1080;***1073;** *1086; ***1086;***1095;***1077;***1085;***1100; ***1087;***1088;***1080;***1075;***1086;***1076;** *1080;***1083;***1086;***1089;***1100;: ***1042;*

[pacoraban]

Hi there,

I would like to try to repare my cable too. I need to download the files and so I first need to post here...

[almia]

Yes i know that just read the manual i didn't invent these just upload here.
I follow the manual and stuck on step 13 the program shuts down on my interface.
I posted here so everyone can try and share experience if these procedure don't work ok byt if it works will be great.
A friend from who got these repair his vcds 11.09

Repair process

Step1: Please ensure that you have installed the VCDS software.

Step2: Plug your disabled cable to the USB. There maybe be a pop-up window to indicate you to install the driver, for damaged cable, let it be, skip it.

Step3: Right click "my computer", select " hardware", then "device manager", then "Other device", the " USB device".

Step4: Right click "USB device", select "properties", select " detail", there will be a line information displayed. VID_xxxx & PID_xxxx, please write down the 4 letters or number for VID and PID.

Step5: Unplug the cable, select" my computer" --"C:/"--"Ross-Tech"--"VCDS"--"RT-USB.inf".

Step6: In item [FtdiHw], please add one more line as " %USB\VID_xxxx&PID_xxxx.DeviceDesc%=FTD2XX, USB\VID_xxxx&PID_xxxx", please ensure the four number or alphabets are the same as the ones you write down in step 4.

Step7: In the end of the text, add one more line as " USB\VID_xxxx&PID_xxxx.DeviceDesc="VAG-COM Compatible USB Interface", the four numbers or alphabets are also the same as the ones you write down in step4.

Step8: Save "RT-USB.inf" file and then exit.

Step9: Unplug the cable, and then plug the cable to the USB port. System will indication found new hardware, and will pop up window for driver update. If do not have the pop up window, let it be, Right click "my computer", select " hardware", then "device manager", then "Other device", then right click "USB device", select update drive.

Step10: Let the driver point to C:/Ross-Tech/VCDS

Step11: System will search the drive for several seconds, then it will indicate that find the driver and then install it.

Step12: Open the software "vidpidfix.exe" i sent you. Click "search", there will be indication two lines of information. First " found one device", second "0".

Step13: Click "0", then click "open", the information will be displayed in he blank dialogue. Click "write default EE data", if success, there will be a pop up information " wirte successful". Then click "ok" and exit.

Step14: Unplug cable and then plug cable.

Step15: Just as the step 10, update the drive and let the file point to the file "VCR_CDM 2.00.00" that i send you. There will be a indictaion information that it install completrly.

step16: Open the file" MProg3.0_Setup.exe". Click" device" and then"scan", if above steps are all well done, there will be information " find one device".

Step17: Use Mprog2.8.exe to open file " genius vag com ept.ept" that i sent you. Then click "erase", if succeed, there will be a information " successful", and then click " program" , if succeed, there will be a informtion " programmed serial under disabled"

Step18: Your computer can recognize the cable now and your cable is ready to use.

Hello people,
I have a vcds of 12.12.3 and my problem is not ready can.
here can help me above mentioned solution?
If not, does anyone know a solution to a problem can not ready?

[paro44]

Hello people,
I have a vcds of 12.12.3 and my problem is not ready can.
here can help me above mentioned solution?
If not, does anyone know a solution to a problem can not ready?

Is your car can-ready?

[almia]

hello paro44

yes, I have an audi a4 b8 type
and my vcds is working about half a year on my car now he does not want
I also put back the date of my laptop, I get a message that date is not korrect.

to correct date:
port status: ok
USB library version: 03.010.19
usb driver version: 2:06:01
interface found
Type: ross-tech hex USB + can
version: 192
footer copyright (c) 2011 by hex microsystems pty & ross-tech, llc.
Status: ready
k1: ok
k2: ok
can: not ready

This message I get
any ideas to solve?

[hk06]

it mean the cable is not connected to the car

[almia]

This message I get when the cable is connected to the car
and if I do not connect I get a message
k1: short to ground
k2: short to ground
can: not ready

[denarg]

New on this forum, need the file to try to repair my VCDS 10.6. Hope it works

[denarg]

Kire106A , I just want to thank you.
You're ept works on my

CHINESE

cable.
I've juste adapt it to my VAGCOM :
Erase the cable with

FTD2XXST.EXE (http://www.ftdichip.com/Support/Utilities.htm)
Launch MPROG3.5 (Same link)
Change ftdi chip, my chip is FT232RL, I've chosen FT232R on MPROG Interface instead of FT232BM

I reload RTUSB driver from VCDS, test the cable with VCDS, it works
I've connected on my CAR (AUDI TT MK1 V6), Test the cable, but CAN is not ready, I've FORCED K connection it works for Engine
I have change my Option to add my new cruise control, it works

Now I have to resolve the CAN problem

Also, does somebody have an English Version in 10.6.4 (Chinese Product), I have the tool in french ?

[Mario6]

VCDS 10.6.4 EN.

If "CAN" is not working. Try another laptop.

https://zachowajto.pl/!GXPpP4taw9PE/vcds-release-10-6-4-installer-exe

Slow download