Register
Results 1 to 6 of 6
  1. #1
    Newbie
    Join Date
    May 2008
    Posts
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default dbox2-nokia, stuck on boot, loading kernel...

    after many reflashing (using IFA and dbox boot manager ), now receiver is stuck bei booting, actualy loading kernel on display, image logo on the screen, and constant rebooting itself.Here is part of mesage from hyperterminal, so please help me.I can still reflash the box with diferent image using IFA, but same booting problem as before, after many reflashing.

    U-Boot 1.2.0 (Tuxbox) (May 18 2008 - 16:19:28)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: .. done.
    find_inode failed for name=boot.conf
    load: Failed to find inode
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

  2. #2
    Administrator
    Devilfish's Avatar
    Join Date
    Feb 2008
    Location
    /cdk
    Posts
    7,845
    Thanks Thanks Given 
    71
    Thanks Thanks Received 
    2,574
    Thanked in
    204 Posts

    Default

    The only way back from this is flashing with IFA.

    Maybe your box isn't in the best condition and it doesn't like cpu heavy images, i.e. images with loads of features. Try and get an image that does TV only with no extras, I think the Laky Pro image is like this, or the Commando Laid Bare image.
    Get Digital Kaos on your Apple or Android device with Tapatalk

  3. #3
    Newbie
    Join Date
    May 2008
    Posts
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Yes, I reflash the box with IFA, but no matter what image, there is allways same problem, and seems bootloader is damaged, I can post hyperterminal output, if someone can determine what is wrong, thanks aniway.
    Regards!

    <--sattmkd added 9 Minutes and 56 Seconds later...-->

    Her is complete log from hyperterminal:

    U-Boot 1.2.0 (Tuxbox) (May 18 2008 - 16:19:28)l rpc_restart_calld: unresolved symbol snprint

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache __wake_up
    Load Ad
    insmod: unresolved sym
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***symbol svc_makesock... OK

    insmod: unres
    Board: DBOX2, Nokia, BMon V1.0
    insmod
    Linux
    Watchdog enabledol rpc_create_client
    I2C: ready
    DRAM: 32

    insmod: unre
    Net: SCC ETHERNETocessnter Frequency

    Options:00/60
    1: Console on nullved symbol rpc_delay
    2: Console on ttyS0WTC: 0xFFFF,
    insmod:
    3: Console on framebufferoy_clientr
    m8
    Select option (1-3), other keys to stop autoboot: 0xdr_decode_netobj

    ### FS (squashfs) loading 'vmlinuz' to 0x100000
    Calibrating
    insmod: unres
    ### FS load complete: 669783 bytes loaded to 0x100000
    Memory: 30
    insmod: unresolved symbol xprt_set_timeou
    .................................................. ............. done xprt_destroyendor: No such file
    Dentry cache hash
    insmod: unresolv
    Un-Protected 63 sectors

    insmod: u
    Uncompressing Kernel Image ... OKy UNIFIXcted STB:
    insmod: unres
    Linux version 2.4.36.2-dbox2 (petze@linux) (gcc version 3.4.6) #2 So 18. Mai 17:box_dbox2_midputer Society NET3.039ernel/drivers/ide/md
    insmod: unresolved symbo
    09:06 CEST 2008ssageng RT netl
    On node 0 totalpages: 8192
    insmod: unresolve
    zone(0): 8192 pages.ue_alloc12c (2002081
    zone(1): 0 pages.rgooch@atnf.csir

    zone(2): 0 pages. symbol tuxbox_db
    Kernel command line: console=ttyS0,9600 root=/dev/mtdblock1 roolved symbol fp_sendcmd

    Detected STB:
    POSIX conformance testing by UNIFIX Table at 0x
    Model: Unknown Unkno
    Linux NET4.0 for Linux 2.4insmod: /lib/modules/2.4.3
    Based upon Swansea University Computer Society NET3.039P request
    Creating 6 MTD partitions on "D-Box 2 flash
    Initializing RT netlink socketoryOTP/TFTP b
    insmod: /lib/mod
    Starting kswapdox2/kernel/driv
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)05a0000 : "root (squashfs)"d Flash-FS superblock ve
    e or dire
    devfs: boot_options: 0x1d: /lib/modules/2.4.36.2
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.0 : "flfs (u-boot)"

    squashfs: version 3.0 (2006/03/15) Phillip Loughersuch file or directoryt= 0x800000, size= 162988
    i2c-core.o: i2c core module version 2.6.1 (20010830)ify sig: 262
    Branc
    Linux
    umount: cann
    i2c-dev.o: i2c /dev entries driver module versi 2008


    0x00020000-0x005a0000 : "root (squashfs)"bootstrap loader (v1.5)nsmod: unresolved
    0x005a0000-0x007e0000 : "var (jffs2)"ock version 3.1mod: unresolved symbol
    0x007e0000-0x00800000 : "flfs (u-boot)"m/nokia-dbox2/kernel/os in Flash-FSiod_
    0x00020000-0x00800000 : "Flash without bootloader"nres
    debug: Got Block #0036

    0x00000000-0x00800000 : "Complete Flash"size= 162988ng_inplacege at 00100000 ...
    Linux video capture interface: v1.00262: unresolved sy
    Branching to 0x40
    mice: PS/2 mouse device common for all miceox) (May 18 2008 - 16:19:28)l rpc_restart_c
    NET4: Linux TCP/IP 1.0 for NET4.0PU: PPC823ZTnnA at 67.200 MHz:
    IP Protocols: ICMP, UDP, TCP
    Loa
    IP: routing cache hash table of 512 buckets, 4Kbytes Core has Silicon Bugs -- Check the Errata ***symbol
    TCP: Hash tables configured (established 2048 bind 4096)d: unres
    Board: DBOX2, Nokia, BMon V1.0
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.lient
    I2C: ready
    DRAM: 32

    insmo
    Starting the automounterETocessnter Frequency

    O
    insmod: unresolved symbol __wake_upved symbol rpc_delay
    2: Console o
    insmod: unresolved symbol __kfree_skbole on framebufferoy_client
    insmod: unresolved symbol xtimeher keys to stop autoboot: 0xd
    insmod: unresolved symbol irq_stat

    ### FS (squashfs)
    insmod: unresolved symbol rpciod_up
    Calibrating
    insmod:
    insmod: unresolved symbol rpciod_downes loaded to 0x100000
    Memory: 30
    insm
    insmod: unresolved symbol __wake_upu
    .................................
    insmod: unresolved symbol xdr_decode_string_inplace
    Dentry cache hash
    insmod: unresolv
    insmod: unresolved symbo
    insmod: unresolved symbol rpc_call_syncigger installed (PITC: 0x12C0)ymbol dbo
    insmod: unresolved symbol xprt_set_timeout
    Console: colour dummy device 80x25d symb
    insmod: unresolved symbol xprt_destroyg delay loop... 66.96 BogoMIPS unresol
    insmod: unresolved symbol xprt_create_proto20k available (1140k kernel code, 348k data
    insmod: unresolved symbol scheduleon SMC1 using BRGttyS1 at 0x0380 i
    insmod: unresolved symbol iput
    Dentry cache hash table entri
    mnsmod: applet not found bytes)
    pty: 256 Un
    /pro
    insmod: unresolved symbol scheduler directo
    Inode cache hash table e
    insmod: unresolved symbol snprintf)s/tuxbox/model: No such file or d
    insmod: unresolved symbol __wake_upche hash table entries: 512 (order:
    insmod: unresolved symbol __wake_upsize->0x800000 mem->0x10000000)
    insmod: unresolved symbol irq_stat 1024 No su

    Sta
    insmod: unresolved symbol fp_sendcmd.12c (20020818) Richard Gooch (rgooc
    insmod: unresolved symbol fp_get_i2cshfs)"
    e or
    insmod: unresolved symbol fp_cmdlib/modules/2.4.36.2
    JFFS2 versi
    insmod: unresolved symbol add_timer, Inc.0 : "flfs (u-boot)"
    insmod: unresolved symbol dbox2_fp_queue_free (2006/03/15) Phillip Loughersuch file or dir
    insmod: unresolved symbol tuxbox_dbox2_mid.o: i2c core module version 2.6.1 (2001083
    insmod: unresolved symbol event_write_messagent: cann
    i2c-dev.o: i2c /dev entries driver m
    insmod: unresolved symbol tu

    loop: loaded
    /proc/bus/tuxbox/submodel: No such file or directorylash driver (size->0x800000 mem->0x10000000)
    /proc/bus/tuxbox/submodel: No such file or directory flash memory: Found 2 x16 devices at 0x0 in 32-bit
    Detected STB: SWrev 0.81nt
    Vendor: Unknown
    debug: B/
    Model: Unknown Unknowned Query Table at 0x0035
    insmod: /lib/modules/2.4.36.2-dbox2/kernel/drivers/ide/mde-cd.o: No such file orte enabledootstrap loader (v0.3)
    Creating 6 MTD partiti
    directoryox 2 flash
    insmod: /lib/modules/2.4.36.2-dbox2/kernel/drivers/ide/mde-de0x00000000-0x00020000 : "BR boOTP/TF sy
    0x00000000-0x0080000
    umount: cannot umount /var: Device or resource busy
    Linux video capture interface: v1.00262: u
    The system is going down NOW!
    mice: PS/2 mouse device comm
    Sending SIGTERM to all processes 16:19:28)l rpc_restart_c
    NET4:
    Sending SIGKILL to all processesPPC823ZTnnA at 67.200 MHz:
    IP P
    Requesting system haltP
    ??debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPSas Silicon Bugs -- Check the Errata ***symbol
    TCP: Hash tables con
    debug: WATCHDOG RESET048 bind 4096)d: unre
    debug: BMon V1.0 mID 01on V1.0
    debug: feID dd gtxID 0b1.0/SMP for Linux NET4.0.l
    debug: fpID 5a dsID 0
    DRAM: 32

    Starting the automounterETocess
    debug: Given up BOOTP/TFTP bootmbol __wake_upved symbol rpc_de
    boot net failed o
    insmod: unre

    Flash-FS bootstrap loader (v1.5)amebufferoy_client
    will verify ELF image, start= 0x800000, size= 162988
    verify sig: 262
    Branching to 0x40000
    Last edited by sattmkd; 26th May, 2008 at 09:38 AM. Reason: Automerged Doublepost

  4. #4
    Newbie
    Join Date
    Aug 2008
    Posts
    5
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Hey I was wondering if you found a solution for this problem, as same thing is happening me??

    Do I need to run a boot manager?? (Never done this before so a little nervous about it as I don't want to damage my dbox beyond repair)

    Thanks
    Sean

  5. #5
    Newbie
    Join Date
    Feb 2010
    Posts
    1
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Same problem here... I ll try the V+ image, hopefully more lightweight than the 11.3 Commando

  6. #6
    Newbie amanewbie's Avatar
    Join Date
    Dec 2008
    Posts
    17
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Happened to my box the other week there. I had laky pro image on it and i ended up putting commando 11 on.... box not rebooted or loading kernal fault since...

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.