Upgrade Autocom CDP with BT module ???

[alldecode]

Did someone try to upgrade Autocom CDP (new look, only have USB, but inside is socket to BT module) with BT modul.

I fix many Autocom, older, with BT modul, but modul dont work, and buy on ebay module same inside Autocom (module L6)BC4_L6 2-1.rarAplication.JPG

[gazvts]

is it cdp+ new style ?
if it is ,The original cdp+ uses connectblue module also it will not work unless you have the custom firmware/dump file from 1 x original cdp+ bluetooth module

[alldecode]

means, modul from old Autocom not same to CDP+?

are you have pinout or link to module for CDP+

[gazvts]

>>>> http://www.digikey.com/catalog/en/pa...-obs421/11935?<<<<

but you need the custom firmware from the original cdp+ vci for to make it work

[alldecode]

ok, this fw must program new BT modul then work?

[alldecode]

or, if find pinout from this modul and put inside L6 modul, maybe working?

GND, pover 3.3v, RX, TX ...

[gazvts]

ok, this fw must program new BT modul then work?

Yes thats correct

[alldecode]

or, if find pinout from this modul and put inside L6 modul, maybe working?

GND, pover 3.3v, RX, TX ...

when recive new CDP+, try from module from old autocom, mybe working, and report to DK.

thx

[gazvts]

when recive new CDP+, try from module from old autocom, mybe working, and report to DK.

thx

or maybe just buy cdp+ or ds150e with bluetooth

[Marek_Spy]

Hi
I try to build such a module, I have a schematic but I have no transmission protocols. Someone can help you and read it?

[sahinx5]

Bağlantı bu şekilde olmalı

[sahinx5]

IMG_20241027_220615.jpg
Bağlantı bu şekilde mi