get somebody with enigmatool...I bet that it will fix your problem
hi,
using the blue chinese tool "super vag-can" trying to adjust mileage the dash restart and remain
with blank display and steppers frezed at last value without returning to zero, no LED`s on, without life.
finaly after many radings i succeed to read and verify well the flash from MICRONAS. eep as well.
please someone do repair them to bring the dash back to life.
is audi A3 made in june 2010 VDO H01 vag-nr: 8P0 920 932 G.
or please give one good flash file, i will write into dash then try again to destroy to see what is happening,
than roll-back action threating the ori flash with the hope to obtain the original state.
booth 24C32 and 29LV800 of the CDC3217G (inside mounted ID`s 00010000 and 000122DA) are attached here.
thanks !!!
A3_8P0_y2010_micronas+24C32.zip
get somebody with enigmatool...I bet that it will fix your problem
is not connecting, returns error 09 (no communication).
let me know the procedure.
my coleague owns enigma, what to tell him to do or to ask in order to reflash the cluster?
update for the tool and flash file for my dash P/N ?
solved,
very easy, copy<>paste two lines from another flash, and rebuild the third one with orig P/N from dash sticker.
HeXeN (29th February, 2016)
which lines ? which flash ? From same dash part number or different dash part number ?
good afternoon friend can help repair the dash, died when I change km plus super vag k
help please ????
arvedo (2nd September, 2015)
box is dead after changing km.
dash not turn this completely off
What you used for this dash? Digiprog, xtool, xcan or other?
arvedo (2nd September, 2015)
FOR
arvedo
WRITE flash and it will be ok
chek pass by PM
arvedo (2nd September, 2015), koki (25th February, 2018), universalauto05 (29th February, 2016), zi0m3k (16th March, 2016)
lupu-sandu perfect.
Thanks everyone for your help
hello someone could give me the pass to download file thanks
Bookmarks