********KD900 remote generator********

[autochei]

I tell PLEASE WHAT CAR and why you chose the menu at kd900 more and you have programmed the remote
Programming manual or software


edit

rapid why u use b09? why u not use b07 or b03 u can give ur customer all in one remote and key
or u try bo7 and not worked?

[rapidlocksmiths]

i didnt have the correct key blade to add to a flip remote , but had keys blanks , bo9 was then the best option . plus this contract want cheapest possible solution and give me between 30 to 40 keys a week so an original key wasnt an option for them either .

on the kd900 menu stand alone i chose chevrolet , then captiva 3 button remote , made remote in seconds as normal , then programmed it via diagnostics in this case with skp900 as every other programmer couldnt get comms , skp900 programmed key and remote flawlessly under immo type 3 , every other programmer couldnt get or maintain comms on this one.

BO9 is a usefull seperate

i know many want more as is always the case , but the coverage , quality and stock saving on this piece of kit is immense , certainly one of the most profitable investments ive made in recent years , with over 300 remotes already , free updates etc , its a bargain .

[cjawahir]

i am also looking at the B09 remote , because of problem with 2010 model mazda 3 , not reading the chip from the B03 remote .

i am trying to to get the tpx 2 more forward ,i will test it today , if not work then will get the B09.

CJ

[rapidlocksmiths]

BO9 is a useful remote on older ford models too , the blades for the flip key are sometimes too long so sit too far from antenna , many ford have a weak pick up especially old ones , these offer a decent solution . alot of people prefer these too in place of the seperate square transit remotes , Though ive not had an issue with a mazda as yet

[obdsystems]

Is A4 8E0 837 220 Q covered yet?

Cheers

[lidons]

Is A4 8E0 837 220 Q covered yet?

not supported yet.
Last week try all models on KD900, and none are compatible.
SIMULATION try out menu.

[cjawahir]

hi here is a mod to the B03 FLIP KEY to work on the 2010 mazda 3 , with out this mod will not start .

enjoy : )
cj

[ninja123]

they work fine on mazda, but you need to program a proper ID63 carbon transponder - your issues are due to TPX chip.

ninja

[cjawahir]

they work fine on mazda, but you need to program a proper ID63 carbon transponder - your issues are due to TPX chip.

ninja

i taught the same thing too , so i cut open the ori key and remove the carbon chip insert in the flip key , still no go , so its a problem with the distance the chip from the coil .

i think the signal is very weak i=on this vehicle unlike BMW


cj

[autofan1965]

On mazda transponder cant be in the middle of reading coil.

[cjawahir]

yes i did notice that the chip on the ori key is at an angle , i cut a JMA key and insert both tpx and carbon and work fine .

cj

[jimmykey]

I would like to see Audi + Vw slot/smart keys added any plans for these at all jimmykey ?

hard to make smart now.
but kd will release its own smart system next month
for more than 200 kinds cars.

[totalkey]

hard to make smart now.
but kd will release its own smart system next month
for more than 200 kinds cars.

What about the fiat and Renault remote?

[ninja123]

yes i did notice that the chip on the ori key is at an angle , i cut a JMA key and insert both tpx and carbon and work fine .

cj

use jma or silca key and B09 seperate remote

[cjawahir]

use jma or silca key and B09 seperate remote

yeah looking at that option now , thanks

cj