********KD900 remote generator********

**paul_12345** · 25th January, 2016, 12:13 AM

Originally Posted by keyprogramming

For what its worth, back in September posting #500 I tried a few until I found the right one for a 2009 Peugeot 207CC.
I used the same remote changing the firmware each time, but used the original flip remote as the first key each time.
I programmed it with an AD100Pro which erases any existing keys, but don't know how this differs from other programmers.

yes that could be the key thing... because maybe the car recognises the first key in the ignition so instead of erasing and programming with the data from the key, it uses the data it already has.

and on the second key it has already deleted the data so gets it from the key.

unless keydiy are wrong and it does not matter?

**gokey** · 25th January, 2016, 01:48 PM

try make key
but appear this
some idea ?

**foxtec800** · 25th January, 2016, 05:19 PM

I usually see that if the cable isn`t plugged in properly to my kd300, needs to be fully in.

**jimmykey** · 27th January, 2016, 12:17 AM

Originally Posted by gokey

try make key
but appear this
some idea ?

MOSTLY IS THE CALBE CONNECT ISSURE
TRY TO CHANGE A CABLE TO REMOTES.
AND ALSO SOMETIMES IF THE BATTERY TOO LOW
ALSO COME THIS'

WE ARE TRYING TO CHANGE THE TIPS

**autoTkey** · 27th January, 2016, 10:10 AM

So this URG200 tool will work like KD900(support all remotes) but you will be able to buy it from anywhere, not only from dealers?
And all other tools(KD200, KD300) will be stopped from production? Can anyone confirm that?

**nazz2** · 28th January, 2016, 05:02 PM

has anyone done denso Rav4 2xbotton remote?

**doolittle** · 28th January, 2016, 10:48 PM

Originally Posted by nazz2

has anyone done denso Rav4 2xbotton remote?

Ive used it on the toyota Previa and its worked

**keyprogramming** · 1st February, 2016, 06:29 PM

Programmed a new NB11 (PSA Style) into a 2005 Citroen C2, original 2B flip(dead, so effectively a no keys job)
Tried 206/207/C2 on the off chance it might work.
Engine started, but no RCL which would make sense as this is for earlier fixed blade C2.
Removed battery, reprogrammed same board as 2B ASK 0536, fitted battery, reprogrammed it, and it worked a treat, well impressed.
Customer well impressed with new style PSA remote, even through it didn't have a badge.
Forgot to mention, the circuitboard on these new PSA as so much easier to take in and out, compared to previous models

**DottoreBL** · 2nd February, 2016, 08:58 AM

Where to buy that new PSA remotes ?

**keyprogramming** · 2nd February, 2016, 11:00 AM

Originally Posted by DottoreBL

Where to buy that new PSA remotes ?

http://www.tradelocks.co.uk/keydiy-r...p-remotes.html

**keyprogramming** · 2nd February, 2016, 12:30 PM

Anyone tried updating their KD900 yesterday or today.
Tried a few times yesterday, and again this morning, same problem.
Progress bar for updating Handheld Device goes up to 97%, stops for 15 seconds and then message appears "Internet is slow now, please try later"
Never had a problem updating before.

**Atex31** · 2nd February, 2016, 01:24 PM

Same problem,

Running 150Mb download speed so it's definitely not my end

**keyprogramming** · 2nd February, 2016, 02:15 PM

Originally Posted by Atex31

Same problem,

Running 150Mb download speed so it's definitely not my end

Thanks for confirming it's not just me that's affected.

**paul_12345** · 2nd February, 2016, 02:45 PM

Originally Posted by keyprogramming

Anyone tried updating their KD900 yesterday or today.
Tried a few times yesterday, and again this morning, same problem.
Progress bar for updating Handheld Device goes up to 97%, stops for 15 seconds and then message appears "Internet is slow now, please try later"
Never had a problem updating before.

This has happened quite a few times for me, where it updates most then fails leaving it saying there is 1 that needs updating.