HOW TO REPAIR AUTOCOM CDP+ (FIRMWARE UPGRADE - VCI not FOUND)

**alladdin205** · 17th January, 2014, 05:03 PM

you're right. maybe I'll buy another, but if there someone with the same problem? If nobody can help me I'll search until I'll find one. If i'll get to the bottom of this i'll post.
Until then I'm still waiting for an advice.

**paro44** · 17th January, 2014, 05:28 PM

Originally Posted by ruffles1986

Maybe the best solution is bay new interface, clone is cheap, and save your time

Enviado desde mi GT-I8260 mediante Tapatalk

Did you check software installation? There is a difference between cdp pro (5 digit serial) and cdp+ (6 digit serial).

**jaxone** · 17th January, 2014, 11:11 PM

makadam , can you maybe upload the files somewhere where they don't want 10$ for the files or all my Facebook friends e-mail's ?

Thanks in advance.

**alladdin205** · 18th January, 2014, 08:06 AM

I've installed cdp pro (5 digit serial).

**makadam** · 19th January, 2014, 09:23 PM

Jaxone, files are free for download no need to pay 10$ !

Sent from my GT-I9100P using Tapatalk

**makadam** · 19th January, 2014, 09:25 PM

Originally Posted by jaxone

makadam , can you maybe upload the files somewhere where they don't want 10$ for the files or all my Facebook friends e-mail's ?

Thanks in advance.

Download is free of charge, just look the page carefully!

Originally Posted by jaxone

makadam , can you maybe upload the files somewhere where they don't want 10$ for the files or all my Facebook friends e-mail's ?

Thanks in advance.

Sent from my GT-I9100P using Tapatalk

**apjmax** · 23rd January, 2014, 02:37 PM

hi.
this procedure can solve the problem on my autocom problem?
i have this. when i go to hardware configuration and i do the test, the software detect vcp on port 10 but when i click on TEST, results on test error.
can anybody help me? i re install all but does not detect VCI. if this solution can solve it, i like to know in advance.
thanks.

**makadam** · 23rd January, 2014, 02:49 PM

Originally Posted by apjmax

hi.
this procedure can solve the problem on my autocom problem?
i have this. when i go to hardware configuration and i do the test, the software detect vcp on port 10 but when i click on TEST, results on test error.
can anybody help me? i re install all but does not detect VCI. if this solution can solve it, i like to know in advance.
thanks.

What type of autocom you have with 2 pcb and 29f800 or with stm?

Sent from my GT-I9100P using Tapatalk

**worldofchiptuning** · 25th September, 2014, 12:58 PM

same problem but with 29f800
solution ???
thx

**jaxone** · 26th September, 2014, 12:25 AM

Originally Posted by makadam

Jaxone, files are free for download no need to pay 10$ !

Sent from my GT-I9100P using Tapatalk

No they are not

It asks for Facebook Login or twitter or some other kind of login.... I'd ratter not use any of those to download a file.
Can you post files on another link please ?

**Sarkan** · 12th February, 2015, 04:32 PM

I've conect all according to instructions and get this message.Where I'm wrong.If makadam has some experience please him to help.

**s1l4c1k** · 3rd August, 2016, 09:15 PM

makadam please reupload . document

**sarbmihai** · 15th February, 2018, 08:41 PM

For TCS 8.0 double bord how to update firmware. Now is in error. Al 4 LEDs are red.

**Stelaras26** · 16th February, 2018, 03:11 PM

lets say that i did all this,and i have to select usb port..
how am i supposed to do that when the device is recognised as unknown device?

**autoden** · 16th February, 2018, 07:44 PM

latching on to his with the same problem, sort of. I have 2 identical laptops, 1st has 2012, 2nd has 2015. When i go back i have to do firware upgrade, then again if i go up. Now all good with 2012, working great. But 2015 not good "vci not found" it used to work ok, so this must be a software problem with laptop. Or is it??????