X6/V8 Key Code Cutting Machine

[agabna]

Hello
and if it stop you need other 400? our 800? to repair it
and all the cost for the machine is 900?
but i think if we are in china we can buy it
x6 machine is for their own market not more

[agabna]

You dont have to be rich to buy an original, I'm sure theres many new starts spending their own savings or getting loans to buy equipment

Also no one likes loosing money but why do you expect others to risk loosing money to tell you about it

Hello
for me i have bad time with Chinese clone in the past
ak400= 2400+ nec =750 ak500= 2500
until i bought mb key prog with =3000?

but some times you ll fined good people can quid you to the right equipment with less money
these people are here in these forum
also some good Chinese co can tell you the true about their products if it is good our no
but for x6 our condor no one like to tell the truth if they are good our no

so i ll be just waiting to spend my money our keep it for 994 which i know it is best than miracle

[estate]

agabna, for me personally it's not about the money itself, it's about profit, i have been in the motortrade for 20 years and have spent big money on things and had to work hard to pay back the cost of the machine and return a profit, but if i can get a tool that will give me a quick return and profit then i will always try that route first. If i have to spend a lot of money i will ( i have over 100 used cars in stock and also a ?35k per year "day job" ), and all the cars i buy are with no keys, and i have a few select chinese clones and get on very well with them. Can i do every car? no. Do i need to, to make a profit? no. I sympathise with anyone who has to invest a lot of money into hardware/tools to earn a living. I think there are a lot of "locksmiths" on here who will try and convince us they use genuine tools when in reality they use a large percentage of clone tools........ I believe the top Locksmiths do not use DK to gain knowledge on clone products as most of us on here do. |There is no shame in making a profit.........Quickly. I am not a charity

[estate]

on aliexpress the x6 is ?900 shipped to the uk 5-7 days...........

[agabna]

agabna, for me personally it's not about the money itself, it's about profit, i have been in the motortrade for 20 years and have spent big money on things and had to work hard to pay back the cost of the machine and return a profit, but if i can get a tool that will give me a quick return and profit then i will always try that route first. If i have to spend a lot of money i will ( i have over 100 used cars in stock and also a ?35k per year "day job" ), and all the cars i buy are with no keys, and i have a few select chinese clones and get on very well with them. Can i do every car? no. Do i need to, to make a profit? no. I sympathise with anyone who has to invest a lot of money into hardware/tools to earn a living. I think there are a lot of "locksmiths" on here who will try and convince us they use genuine tools when in reality they use a large percentage of clone tools........ I believe the top Locksmiths do not use DK to gain knowledge on clone products as most of us on here do. |There is no shame in making a profit.........Quickly. I am not a charity

hello
i am with you 100% i need the at the end the result the profit will come later on

for me i am not a locksmith but some times i need a key at the moment to program the car i have to waite some times two days for the key to switch the igntion on just

so if the chinese coding key can work it ll help me on my main work
i have more than hunderd chinese clone and they are working 100% like orignal not shame to use it if it can do the work
i am waitting for the result which is the best bettwen new machine (x6 our condor ) no need for the speed just which one can do the work

[estate]

going to get christmas out of the way and enjoy it, then i think i've made my mind up that i will buy an X6 and a few spares at the same time

[siyadk]

Do the Chinese seller sell spare parts as well for this machine?

[estate]

will find out............

[obdmaster]

Do the Chinese seller sell spare parts as well for this machine?

Wander if decoder, cutter and belts are same as A5???

[estate]

it comes with 2 spare belts and spare cutters and plotters.

[obdmaster]

it comes with 2 spare belts and spare cutters and plotters.

If its anything like A5 m8, you will need more than 2 decoders in the first 6 months , as theyre made out of very brittle metal and Have a tendacy sometimes to break when decoding a key.

[king alie]

hello
no problem I think in the decoder it easy to find new one our made your own , the problem will be if the motor is not good
and the direction is not like the common motor in the market because I had never read any information about it

[estate]

i personally will not use this for decoding work, only cutting from code. I will use duplicating/milling machine to copy, it should prolong the life of the x6...........

[sparkz02]

Well got a mircale a5 over a year ago, (it had old software early 2012) which I wasn't aware of & trust me as a starter I kept thinking I have a good machine, it has to be me, but there was soo much stuff that didn't work. Struggled for ages to cut keys sometimes. So if this is an old clone of the A5. Oooo expect some headaches. Now with the newer software things have settled abit. If you want a cheap cut to code your better of with a chacka bay(come up for cheap second hand), had that an old software version of mircale, I can truely say its a bit slow but miracle has some catching up to do. (I know people mock the chacka bay, trust me its not bad, its slow but it WORKS).

[Automat]

Any brave soul buy this X6 yet? We wait for review......