Hi
Need some help.
Can anyone decode the key.
Hi
Need some help.
Can anyone decode the key.
Last edited by auto techniek; 14th January, 2018 at 05:43 PM.
VA2 after 2010? If this is right, using the invert bitting should be. 576856. When rotating the picture 180 degrees.
I see that it is not in the software you are using together with the machine.
It has only only VA2 from 2002-2009 available.
Hoi
It is VA2 from a clio 3 from 2006.
I think this is not an easy one. ABCDEF in heights.
But you are quite close with putting this in your software or machine. ACB-AAD
Customer sent you only a picture. Or you can not decode with the machine?
Or you can cut and test until you get a working key?
I see you rotated the picture also. Easier to read like this.
Last edited by Weasel3; 14th January, 2018 at 11:21 PM.
auto techniek (15th January, 2018)
Hi
Are Miracle A5/A9 cutters and tracers also suiitable for v8/x6 machine?
My cutters/tracers need to be fastened with a screw.
What are the specification of the cutters?
Last edited by auto techniek; 18th January, 2018 at 11:24 PM.
auto techniek (18th January, 2018)
Do you know where to buy?
How often does everyone calibrate their machine? Once every time it's turned on? After every key that is cut?
I do it before each cutting job.
darknezz19 (22nd January, 2018)
I calibrate every time begir use .
Found that the key is cut more accurate and much better
I never used to calibrate .sometines after cutting the key was perfect on the door lock but a bit catchy on the ignition since I calibrate never have this problem.
Sent from my SM-G925F using Tapatalk
darknezz19 (22nd January, 2018)
I can see in this thread there are a lot of bad comments on this tool .
I would like to share my experience with this tool
I bought this tool 2 years ago and this is the only key cutting machine I have at the moment and I cut minimum 15 keys every week with it and it never let me down apart from buying cutters .
For a £900 automatic key cutting machine i think it has done a lot more for me.
Well happy with it even thinking of buying another one for back up
Sent from my SM-G925F using Tapatalk
no i just use the machine never used the software on pc or laptop.
Bookmarks