Cas4 5M48H programer

[markony79]

on another forum, i was talk with guy who have this
he tell me its work perfect, never have problem

CAS4 + Programmer

whoo have this , and how its work?

the smok programer, i get mail from him, its work 80%

[TULGEYWOODMAN]

on another forum, i was talk with guy who have this
he tell me its work perfect, never have problem

CAS4 + Programmer

whoo have this , and how its work?

the smok programer, i get mail from him, its work 80%

smok=80% ok...........................20%=cost you a bleedin` fortune !

[rukartinatv]

smok dont work at all maybe 20% last 5 cas4 dflash was erased
cas4 programer its the same like codiprog mk2 i spoke with this guy he told me codiprog and cas4 its the same just different shape

[markony79]

soon post the solution for codiprog on 5M48H...modificated myself

try 4 cas 5M48H , before version 1154 ....and its work 100%

[kisslorand]

That would be nice. My Codiprog can't even ID MCU.

[markony79]

open H3 adapter and you will find same ciurcit conections from Xprog-M adapter ADP 00-17, or how we said this BDM adapter, but in small size
the problem in H3 adapter is the Xclks or white color cable is wrong conected on H3 BDM, on GND...check with multimeter resistor between GND and Xclks must be o-NO conections

[TULGEYWOODMAN]

open H3 adapter and you will find same ciurcit conections from Xprog-M adapter ADP 00-17, or how we said this BDM adapter, but in small size
the problem in H3 adapter is the Xclks or white color cable is wrong conected on H3 BDM, on GND...check with multimeter resistor between GND and Xclks must be o-NO conections

I will check mine in the morning.

[markony79]

I will check mine in the morning.

Hi
did you check it?

[kisslorand]

I checked it, it is connected to GND. On Xprog-M adapter ADP 00-17 it is 33ohms.

[rukartinatv]

I checked it, it is connected to GND. On Xprog-M adapter ADP 00-17 it is 33ohms.

so i dont understand white cable shut be connected to the ground or no?

[kisslorand]

I just connected a 30 ohm resistor to the white cable, and now it is the first time my Codiprog can ID and Link. I still don't know if it is working OK, because I have only a broken CAS4 here.

[markony79]

I just connected a 30 ohm resistor to the white cable, and now it is the first time my Codiprog can ID and Link. I still don't know if it is working OK, because I have only a broken CAS4 here.

not only me is get wrong H3, i think all codiprog which they sell have wrong XCLKS conected, but nobody check this
come on people, this tool can work good, if found solution for BDM ciurcit .... I am still in experiments with this H3 cable....i try next days to concted the ADP00-17 on Codiprog,
and post result here

[kisslorand]

What modifications have you done to your H3 cable?

[markony79]

not only H3 cable, also codiprog
change the parts with better quality inside codiprog

use the twisted pair cables, not coaxial

[markony79]

change also tantal capacitor 107 , and put 106 ....like have it in ADP 00-17 BDM xprog-m