Activation Autocom Delphi 2013 Release 3

**r-1** · 31st December, 2013, 01:44 PM

Autocom 2013.2

**smirnoff_rules** · 31st December, 2013, 01:54 PM

If you downloaded Autocom 2013.3 + HWID_GEN_+ Patch
https://mega.co.nz/#F!QURnQB6Y!Sap_KWAOc5RO68vCS4iQVA
You will now have 3 folders
Autocom 2013.3 iso , u will need to mount this image with something like magicdisc its free
Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview
now mount your image and install 2013.3
you will be asked for your vci serial
a-710-476 cdp (5 serial unit ) a-710-142 cdp+ (6 serial unit )
open h/w serial keygen and add your serial and click to show hardware serial number you
will need this at the end of the install.
after you have installed it will close
now go to C:\Program Files \Autocom\Cars CDP+
open that folder , now open the patch folder you download and drag the file into that folder
into C:\Program Files \Autocom\Cars CDP and overwrite them all
now open autocom and click right arrow , on the next screen click the top button
you will see a box yes for save and no for open . you want to save at this point
now all you have to do is upload that activation file to here and its will be activated
then put back in that place and click the top button again and open ,
browse to file and open and thats it

**mesrine_29** · 31st December, 2013, 01:56 PM

Originally Posted by r-1

Autocom 2013.2

Please, Post in the good thread, here Autocom 2013.3

Activated

**r-1** · 31st December, 2013, 02:40 PM

Autocom 2013.3 activate please .25380.XFRJRMCCXXJH

**mesrine_29** · 31st December, 2013, 02:59 PM

Originally Posted by r-1

Autocom 2013.3 activate please .25380.XFRJRMCCXXJH

File enable, good diag

**dema2** · 31st December, 2013, 06:58 PM

Originally Posted by mesrine_29

Hi,
Activated
Don't forget button reputation or thanks.

Thank you very much mesrine_29
but i have the some problem, after clean al sistem, and new installation of 2013r3 Delphi, i have again this error when i intent to activate " operation failed. Please verify that the installed version is valid for your type of vci ", can i resolve this problem.
I have 30250 vci ,i have installed Delphi ds150e , 30250 serial , HWK KHGYGHIFQSGH, i do not have use alchool 120 or other soft like this, for to install Delphi, because i not have an iso image but i have exe file, on the first lap top all ok, in this second lap top is a problem...i do not have idea for to resolve......
Thank for any suggestion
Best regards dema2 italy