tech 2 sps dongle

**Scopepattern** · 28th October, 2009, 02:02 AM

Originally Posted by DIAGNOSE64

I use this maybe it's not the same but now I can unlock the Tech2 for programming and key learning.

Ronald

Hi,Where are these two files to be installed?
I cant seem to get them to work in any folder i put them in !

Many thanks

**Scopepattern** · 28th October, 2009, 02:18 AM

Originally Posted by gofo

Both of the files needs to be in c:windows/system32/drivers

Hi Does tis need to be configured after the two files are copied to the drivers folder,still cant get this to work.

Thanks.

**zrr_immo** · 30th October, 2009, 08:14 PM

Test the crack dongle ....

crack_TIS_no_dongle_required NEW

**uhaulkid** · 2nd November, 2009, 08:21 PM

Originally Posted by zrr_immo

Test the crack dongle ....

crack_TIS_no_dongle_required NEW

will this work on the gm tiss 200o usa version? i am trying to flash 01 cav bcm and i ran over my usb key....

**MxWill** · 2nd November, 2009, 08:31 PM

thank for all the posts i try em out later but i stupidly broke my leg at motocross so it a be a while before i get back down the work shop

**Patrian** · 5th November, 2009, 04:40 AM

Originally Posted by zrr_im*o

Test the crack dongle ....

crack_TIS_no_dongle_required NEW

THANKS very much for your "Pill" but ONE SERIOUS QUESTION:
Why when i try to install by pressing EXPRESS i get the message "ERROR Registry access error" even if i try custom and set it to 32 bit driver only i get the same message about the registry access error, and in under "System" part of the windows it says "Driver is not started"!!! Any GOOD idea?????

Thanks a lot....

Cheers!!!!!

**AvechuchoAxel** · 5th November, 2009, 06:44 AM

Does it work on GM USA models?

Thanks!

**mojomojo** · 5th November, 2009, 12:27 PM

Can I use this software with a different interface other then the TECH 2 and Does this work sps crack on TIS GM USA?

**Scopepattern** · 5th November, 2009, 09:47 PM

Originally Posted by patrian

THANKS very much for your "Pill" but ONE SERIOUS QUESTION:
Why when i try to install by pressing EXPRESS i get the message "ERROR Registry access error" even if i try custom and set it to 32 bit driver only i get the same message about the registry access error, and in under "System" part of the windows it says "Driver is not started"!!! Any GOOD idea?????

Thanks a lot....

Cheers!!!!!

I have tested dongle emulator on opel (01/2008) and saab Tis ( 01/2007) and both work perfectly installing driver first and then overwriting both files in program files/cosids/bin and have successfully updated my Tech 2 (only have 10mb pc card at this time) and carried out enable programming, not sure why its not working for you Patrian ! Are you maybe running 64 bit O/s?

I am running windows xp sp2 32bit,Keep trying Its Worth the effort to get it working.

**Patrian** · 6th November, 2009, 02:53 AM

Originally Posted by Scopepattern

I have tested dongle emulator on opel (01/2008) and saab Tis ( 01/2007) and both work perfectly installing driver first and then overwriting both files in program files/cosids/bin and have successfully updated my Tech 2 (only have 10mb pc card at this time) and carried out enable programming, not sure why its not working for you Patrian ! Are you maybe running 64 bit O/s?

I am running windows xp sp2 32bit,Keep trying Its Worth the effort to get it working.

Thanks a lot m8 about your info but listen:

BASICALLY i HAVE ORIGINAL Dongle Key and all the Equipment.....
This procedure i want it for one Friend.....

For testing, i try to use this procedure in my Lap, but once working and other ALL THE TIS2000 STUCK A LOT!!!!!
The message about driver always PRESENTING!!!!!

Anyway..... For the "Story" i using Windows XP with SP3 32Bit, OPEL TIS2000 Version 93 (8.2008) and Tech2 with 32MB Card.....

Cheers m8!!!!!

**Pete M** · 7th November, 2009, 06:17 PM

Originally Posted by patrian

Thanks a lot m8 about your info but listen:

BASICALLY i HAVE ORIGINAL Dongle Key and all the Equipment.....
This procedure i want it for one Friend.....

For testing, i try to use this procedure in my Lap, but once working and other ALL THE TIS2000 STUCK A LOT!!!!!
The message about driver always PRESENTING!!!!!

Anyway..... For the "Story" i using Windows XP with SP3 32Bit, OPEL TIS2000 Version 93 (8.2008) and Tech2 with 32MB Card.....

Cheers m8!!!!!

patrian

Sounds like your PC or Laptop doesn't have a parallel port (printer port)

I haven't tried this software dongle but it sounds exactly the same as the one I have which emulates a parallel port dongle

No port, no work

Peter

**bebetvas1** · 9th November, 2009, 08:01 PM

Originally Posted by Pete M

patrian

Sounds like your PC or Laptop doesn't have a parallel port (printer port)

I haven't tried this software dongle but it sounds exactly the same as the one I have which emulates a parallel port dongle

No port, no work

Peter

Thanks for the info
On the laptop i tryed it, there is LPT1 and Com1 port too
and still the same TIS2000 freezing

can you share you're dongle emulator?

Thanks