satlink ws6906 tuning problem

[josepheid503]

hello everyone,

I have a satlink ws-6906 i just did an upgrade for the software and after that the meter is not working anymore. the machine is booting and functional but the "lock" light is always on and when i try to scan a certain TP the quality and signal bars are both "0%".

The question is how can i reload the original firmware that was shipped with the satlink, or anyone have another solution for this problem? maybe its a tuner driver problem.




Thank you in advance

[shaunfree]

HI josepheid try here mate http://www.digital-kaos.co.uk/forums...6906-a-396430/ hope this helps cheers shaun

[josepheid503]

HI josepheid try here mate http://www.digital-kaos.co.uk/forums...6906-a-396430/ hope this helps cheers shaun

Thank you shaunfree for the great reply, but i did try this method before and did not help.

[josepheid503]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
satlink ws-6906.zip


Best regards, J.E

[saidkaon]

Muchisimas Gracias josepheid503. The problem for my satlink ws-6906 is resolved with your firmware.

[livehunt]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
satlink ws-6906.zip


Best regards, J.E

worked for me m re leafed
thanks

[smeestu]

worked for me m re leafed
thanks

hi all new to the group can you edit the tp's with this or is it just a firmare upgrade

[genzy01]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
satlink ws-6906.zip


Best regards, J.E

same problem blue lock still on and no signal, please help

[genzy01]

same problem blue lock still on and no signal, please help

after using satlink ws-6906.zip works again. thanks josepheid503

[ajam90]

hi Guy.. Anybody know how to solve my NEW ws-6906 the problem detection for TP 12500 v 43200 Ku Band FTA in Chinasat 11 bad low signal not locking compare with ws-6933 within 2-3 minit fast locking.. Is it problem SYSTEM of must Upgrade FIRMWARE..?

I need for Help.. TQ Guys

[rcleary99]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
satlink ws-6906.zip


Best regards, J.E

Hi just downloaded zip done the upgrade worked brilliant for my blue lock led staying on
thanks a million

[avn]

thanks

in the djpbox sat there are new things like key set and blind scan

anybody try it?

[Technophobic]

thanks

in the djpbox sat there are new things like key set and blind scan

anybody try it?

Yes I have had it on my meter for about an hour. Afraid I cannot enlighten you further, I am trying to figure out how to get the menus to use the whole screen. At present it makes things quite difficult to see.

I think I might need a magnifying lens add on.

[wba]

Hi dear,

i see you are handy with the firmware,
is there a way to get change the firmware so the Satlink will also check the normale TV signal here in Spain?
i have see it once by a handyman also changes some things, but i realy dont know what he has do with it.

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
satlink ws-6906.zip


Best regards, J.E

[sikonauta]

thanks. i solved the problem whit your firmware.