Chineese Galletto V54

**magnacin** · 13th April, 2014, 02:35 PM

Yes. I try to write obd file i gor directly by removing chip. I think they arebthe same memory size so what may be wrong?

Enviado desde mi SGH-I747M mediante Tapatalk

**bubu55** · 14th April, 2014, 04:21 PM

If interested I can update all Fgtech v53 chinese clone to v54.

Update is full via sw, with this you can run chinese clone under windows 7 witouth buy new one

**Tes1a** · 14th April, 2014, 10:12 PM

Originally Posted by bubu55

If interested I can update all Fgtech v53 chinese clone to v54.

Update is full via sw, with this you can run chinese clone under windows 7 witouth buy new one

and how much cost that solution?

**youk** · 14th April, 2014, 10:43 PM

LOW VOLTAGE DON'T WORK

**morgano** · 14th April, 2014, 11:50 PM

MAybe he just connected USB, not OBD nor power to the fgtech. That doesn't necessary mean it is not working.

**magnacin** · 15th April, 2014, 12:02 AM

Thanks for replies. Voltage from battery is ok. I actually read and wrote to a megane 2 ECU without any issues. So far just this peugeot ECU is giving me trouble.

**gezame** · 15th April, 2014, 12:05 AM

Originally Posted by magnacin

Hi,
Please a little help. I tried to write a file to a Peugeot 206 1.6 petrol ME 7.4.4 This file I have been using for some time, but what I did before is to remove EEPROM and program with programmer and then resolder to ECU. File worked ok. But now that I try to use galletto I get the following message: Writig initialization... reading error or wrong file dimension. I am including the file if someone can review it or has a solution to it. According to galletto cheksum appear as ABC0. I don't know if its is file problem or tool issue. Any advise on how to correct issue.
Thanks for your help

Hi
Fgtech can read-write this ecu in obd (or table) without problems, but only partial read 64kb.
Br.

**gezame** · 15th April, 2014, 12:08 AM

Originally Posted by sinan33

Are you trying to write the file over obd which you have read from bdm?

Hi
Bosch Me7.4.4, do not can read-write in BDM.

**bubu55** · 15th April, 2014, 07:43 AM

Originally Posted by youk

LOW VOLTAGE DON'T WORK

Low voltage because not connected to obd

**robytza** · 15th April, 2014, 09:05 AM

i can do this update too ... very easy job.
i already did it and using it for 2 months on many cars.

**pasquale78** · 15th April, 2014, 09:42 AM

my fgtech v53 china working in windows xp e w7 ok, no cange date.
I can help those who need to run the software v53 on windows 7
info via PM
PS my help is not for profit

**magnacin** · 15th April, 2014, 06:07 PM

Originally Posted by gezame

Hi
Fgtech can read-write this ecu in obd (or table) without problems, but only partial read 64kb.
Br.

With this partial readwrite on those 64kb is that were maps are located? If I manage to modify that part can I tune ECU withjust thosekb? Can kess V2 do the whole memory read/write? or just same result. It happens that I already have a good tune for that ECU and want to use it.
Thanks for reply.

**aleksandrzaharenko** · 16th April, 2014, 07:10 AM

Guys. how to run on windows 7 ?

Help my

**robytza** · 16th April, 2014, 08:08 AM

is anyone who bought the v54 from china ?
can you please post the eeprom read of the chinese v54 made with the usbfix tool ?

**bubu55** · 16th April, 2014, 08:20 AM

Originally Posted by robytza

is anyone who bought the v54 from china ?
can you please post the eeprom read of the chinese v54 made with the usbfix tool ?

Problem is not ftdi.
If sw start but not recognize your tool is because standard sw of v54 allow to run only specific serial number (stored in Nxp mcu).

For update v53 to v54 correctly you need specific modded sw version