i dont remember.... put this kei inside, turn on ignition, use SUZUKI TOOL KEY CODER, and chose anything... Connect or sth...
i dont remember.... put this kei inside, turn on ignition, use SUZUKI TOOL KEY CODER, and chose anything... Connect or sth...
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
can you write with the obd jack or is it best to attach it to the current with a charger?
what you mean? you can flash over obd
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
sabatinomarco77 (13th November, 2017)
I mean if it's a safe flash without putting the battery under charging to avoid blocking the control unit
i always connect battery charger, i use Bosch C7..
its always good to connect battery, more safety...
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
Nezakabude (20th November, 2017), sabatinomarco77 (13th November, 2017)
Problem Solved with fgtech Suzuki tool
can I use it?
hello i need to know which elemnets on galletto board are for CAN K-Line and BDM can someone explain please i need to fix my galletto
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
hello Bubu could you send me the V54 software? i have a clone with no working software.
Thanks in advance!
Hello friends. I need one help if someone knows how. FG2 v54 offer to read SID806 (C3 1.4 HDI) but if i put pin 28 of flash 29F400 to GND. I tried but... If i not put boot pin to gnd, with Galletto software i can do it ID and i get numbers of ecu. After that Read button is still greyed. If i put boot pin to ground, give ignition on, try to get ID, i get error and Read button is still grayed. Anyone know procedure ? Its possible to read via OBD2 ?
KESS also not offer to read this ecu, only write. At the end i am read flash wiith programmer but i want to read with FGTech if possible.
Thank you
Bookmarks