Chineese Galletto V54

**sahnoun363** · 2nd April, 2017, 03:13 PM

Hi everybody

I have problem on my Galletto V54 lack of communication with the computer in boot mode and via OBD
Someone can help me

Thank you

**JaxMustang50** · 5th April, 2017, 04:58 AM

Originally Posted by sahnoun363

Hi everybody

I have problem on my Galletto V54 lack of communication with the computer in boot mode and via OBD
Someone can help me

Thank you

I have the same problem with mine. Trying to clone a BMW Bosch me7.2.

**BoNzOtM** · 8th April, 2017, 08:22 PM

why i get wake error? what should i change?

**AVDigitale** · 13th April, 2017, 09:41 PM

hello i have galletto v54 master china clone is working good with bdm jtag ,but i like to read and write vag car edc16u1,edc16u31 and edc16u34 is safe to do this cars over obd port thanks

**AVDigitale** · 28th April, 2017, 11:30 PM

hi i have china clone galletto v54 but i have problem in bdm is not working how to fix them what need to do to repair in obd2 worked good but just bdm and jtag is not worked what can be problem thanks

**AVDigitale** · 29th April, 2017, 12:15 AM

20170429_005350_resized_2.jpg thia is my pcb board of galleto is good or not

**carmageddon** · 29th April, 2017, 09:10 AM

OBVIOUSLY NOT

all china tool have bad components to change and many software are old and bad

**AVDigitale** · 29th April, 2017, 10:56 AM

Please can tell me which component to change and which software to get if you can't thanks

**AVDigitale** · 29th April, 2017, 12:12 PM

Which components need to replace to work bdm jtag function and can and kline without problems

**morgano** · 29th April, 2017, 01:43 PM

Originally Posted by AVDigitale

Which components need to replace to work bdm jtag function and can and kline without problems

Whole pack, go to first post and start from the begining.

**AVDigitale** · 29th April, 2017, 04:53 PM

ok thanks i purchase now them but i dont find two components to buy for u5 and u6 87RD LP295 1ACM can i replacment with others can you help me ,and for Q20 and Q18 i can't find ZVN2106a and ZVP2106a with which another can be replacment

**AVDigitale** · 29th April, 2017, 06:04 PM

is the same or diferent about this E-L9637D and L9637D which to get for the best

**morgano** · 29th April, 2017, 08:47 PM

For LP2951ACM check output voltage, if correct no need change. As for the mostfets Q20 and Q18 i suggest you look in rs-online, sure they have and better use that same P/N not another. L9637D are same no matter which you choose.