1) Clean the tank and pipes filings !!!!!!!!!!!!
2) change pump petrol or checked
3) Changed petrol pump οr checked
4) I checked cables all ok!!!!!renault.jpg
the car had no pulse injectors, the problem was in the ECU.
1) Clean the tank and pipes filings !!!!!!!!!!!!
2) change pump petrol or checked
3) Changed petrol pump οr checked
4) I checked cables all ok!!!!!renault.jpg
the car had no pulse injectors, the problem was in the ECU.
I had same problem, on the first I have made recallibration 93c46, after that solder again ecu connector pins..and everything is OK! kangoo 1.9d 2002, DCU3R.
cuby
sayonarab (27th June, 2017)
Hi @sayonarab,
I can't send email...here is all,
try-report,
regards,
cuby
Last edited by cubica1; 27th June, 2017 at 11:35 PM.
BusCan (10th September, 2018), clc79 (9th November, 2023), ivica21 (19th July, 2018), joker007 (27th March, 2019), LabraxDz (1st February, 2021), mapexo (18th July, 2018), mexanico1971 (4th September, 2018), mijatx (3rd August, 2017), Puhi7799 (10th March, 2021), rrr500 (27th June, 2018), sanden134 (20th February, 2023), sayonarab (8th July, 2017), Stelaras26 (22nd March, 2018), vaidas89 (20th October, 2017)
Thank you very much cubica.Do you know how I can read the osm value in the ecu to write the same value on the osm sensor? I suposse that the value must be the same so i Think:
1. Read the ecu value
2. modify the osm value.
Right?
Thanks. Good info
Bookmarks