New fem or used fem with keys and adapt. Ori eeprom and keyless wont restore
hi
f30 after desoldering 95128 eprom all data lost {maybe overheated }
in new eprom i wrote data from another FEM but car now starts only from emergency coil { remote did not works}
i try wrote many dumps from another fem . update FEM with ISTA , but remote still not works
is there posibility to restore data ?
what if i add new key ? remote will works on new key ?
OR I NEED TO BUY NEW FEM ?
Thanks in advance
New fem or used fem with keys and adapt. Ori eeprom and keyless wont restore
Renault ECU tool / IO terminal / A.S.W
Program new key for this FEM then the car start it should start by keyless, or use the same FEM renew it and adapt it by AVDI
Hi
i had a same situation, i bought new FEM from the dealer....
Other dump solutions not work
fred77 (12th March, 2021)
£506 plus VAT.
Also did you program a new key into position 1 or 2 already?
SOLIUTION for "profesional" DRUGOWAZ
NO NEED TO BUY ANY NEW FEM !!!!!!!!!
find any 95128 dump from here make all programing fem with vvdi2
restore coding
now in car key must start only from emergency coil
next
at first read isn by vvdi from working key
erase key with vvdi
disasamle key
renew key by vvdi key tool or vvdi prog
program "old" -new key with vvdi2
AND ALL !!!!
maybe all that can do with bmw explorer or autohex or anything else
PRESS THANKS FOR WHO IT WILL HELPS
Last edited by remsia; 9th January, 2020 at 09:24 AM.
alclot (13th April, 2022), autochei (8th January, 2020), autoremaps (13th March, 2021), boxsport (9th February, 2021), castin (11th March, 2021), dekimin (15th March, 2021), Ecuprog31 (9th February, 2021), Faraday (27th January, 2022), filiprow (8th January, 2020), gia (21st July, 2021), jurebv (2nd February, 2022), lalaina74 (13th August, 2021), looking77 (19th February, 2020), milehighlockdoc (26th July, 2021), nyandacca (16th July, 2021), p1et (10th January, 2020), Raould (27th April, 2024), rola1971 (21st February, 2020), scotlock (Yesterday), Supas (26th April, 2024)
I agree.
I restored 2 of them, with autohex
almost the same procedure as -remsia
“The capacity to learn is a gift; The ability to learn is a skill; The willingness to learn is a choice.”
I have done many FEM replacements from used modules, DME/DDE CAS ect ect. And to be honest on a scale of complexity this is a very straight forward job just need the right tools. For some it will make no sense to invest in these tools and so a new FEM will suit them fine. Even professionals buy and fit new parts!
LEVEL 2 ....
another car
another fem
in the midle on flashing somethig goes wrong vvdi2 wrotes about error
now wheh fem power on on bench only relay clicking click click ...
with vvdi2 sometimes i can conect to fem .sometimes not but when conect it conect with errors in keys 000000 and ...
when i try to reflash i get error 22 in vvdi2
what are soliution ?
ps soliution to buy new or used FEM i know ..... please do not offer it
i want to restore old fem
thanks in advance
super jumbe (20th July, 2021)
How i can flash if i cant read fa with esys ?
As my experiance expacialy vvdi bmw like russian roulete
I am thinking to buy autohex as i read its good opinions from users I have bmw explorer and his do not assign my in many years but it do not have update ecus fuctions .vvdi bmw as i try have many many bugs . With esys are complicated to work
Sent from my iPhone using Tapatalk
Just Consider helping Freely like I want to do...
Thanks and Rep are Always Welcome...
Bookmarks