from the looks of it your system just needs fine tuning... make sure your dish bracket is straight on the motor stub your lat on the motor is set to 54. if your pole is 100% plumb then while on 1 west peak the dish by checking the weak transponders at 12.647 h/v and 12.687 v/h and also try ajusting the lnb forward/backwards in the lnb holder. if you follow the points of. 1 pole plumb. 2. dish central on motor. 3 motor lat. lat/long in stb. skew/focul point in lnb is just a case of fine tweaking... also make sure when looking down from above the motor that it all looks square and the brackets are square on as a couple of millimeters out on these can make a big difference when tracking the arc on weaker txp,s/satellites. regards mdt
Bookmarks