Not need desolder flash, just read in boot mode.
Not need desolder flash, just read in boot mode.
Put boot mode doesn't help. Cannot read in boot mode either.
It's strange, i use mpps china clone and all ok.
Usually OBD, if without car boot.
Maybe problem in drivers or com port settings ?
Don'T know, every other type works perfect with v54. Only Honda EDC16 is the other type what can't be done through OBD, always have to do by BDM. If fomeone know solution maybe will share
This Ecu can easy read by boot mode with mpps galletto 2 dont work !, you need to deslder immo eeprom in back side of the ecu, to read by boot!
I got that info about desoldering immo eprom before. Next time will try that, but first ask about why it doesn't goes by OBD
Because your immobox not working and disable to download by obd
Fec001 (6th November, 2014)
So when there is immo problem, then not possible programming by obd?
YES or make immo off and you can read ECU without immo box.
Fec001 (6th November, 2014)
Just desolder eeprom and all be ok.
DONT FORGET TO LEAVE THANKS + REP!!
DPF, EGR, O2/LAMBDA, ADBLUE, VMAX/SPEEDLIMIT, CHIPTUNING FOR PETROL/GASOLINE AND DIESEL VEHICLES!
EDC17 VAG IMMO OFF, ECU CLONING, BMW EDC17 ECU CLONING!!!
Fec001 (6th November, 2014)
yes i have the same problems like this with this kind ecu but with desolder immo eeprom all is fine in boot mode with MPPS v12 ,and is litlle bit easy of this to desolder the flash .
Chiptuning/DPP/EGR/LAMBDA(O2)/FLAPS/Adblue/DTC OFF / EDC17 Immo OFF
Kess v2 eu. clone full/Ktag eu. Clone 6.070 full
Info on pm
Kess v2 ori , K-tag ori, MAGPro2 x17, Galleto v54 EU ,Winols ,AVDI full ori, Orange 5 /Omega /Xprog/Upa all ori , VAS Pc , Porsche PIWIS 2 and etc........
Fec001 (6th November, 2014)
Bookmarks