Hello everyone, my situation is the same ............
Hi,
Does anyone has an issue with 5.5.1, like you read successfully eerpom or MCU, then you want to read/wrige again, and software always hangs on Check Device..?
Before it was working fine, this problem just started recently. Tried on 2 different PC - same.
To get it working you need to replug device and restart the Xprog software, and again only for 1 time.
Hello everyone, my situation is the same ............
Never program Atmega with Xprog. Anyone knows why are the Read and Write buttons grayed????? Blank check and erase device is ok successfully.
On pics, port is unidefinied because xprog is unplugged. If plugged in and port is ok, problem is the same.
Last edited by Fec001; 17th May, 2016 at 01:27 PM.
select FILE / NEW PROJECT
then PROJECT / FILES... and select file , next you see what you need.
Fec001 (17th May, 2016)
Great, found that !!!! What about lock bits and fuse bits?
anyone have
Xprog 5.5.1
in hex for eprom and flash
I have problem " Bootloader inistilisation error " in tms 370C036 ( tms from iaw 6r.30 twingo ,tool : xprog v5.55 clone with dongle ) I use adapter P/C:1 002-0002
on this adapter written Plcc28 but it is an Plcc44 , is that right or I m wrong ?
I want to downgrade to v.5.51..could anyone read this chip with v.5.51 ?
I have this error.. Anything what I try to read, get this message
EDIT:
Solved with setting lock and fuse bits right.
Last edited by Fec001; 23rd May, 2016 at 08:23 AM.
hi to all
i face the following issue
i can read or write only once any mcu
second time stuck on ''check device'' and only green led is on and i cant even close program
can close only from task manager
after restart working again but one time
win7 32 bit
couple weeks ago was working
dont know if this was after an update
solved
bad exe file
unzipped again
Last edited by sv2hqx; 25th May, 2016 at 09:02 AM. Reason: solved
problem register Solution? any idea ?
Hi to all, anyone can tell me about the new 5.60 version clone? Its stable and works good?
Thanks!
I tried with 5.5.0 with 5.5.5 and with 5.7 (this one works, but I dont have any access) and nothing works, hopefully this one does!
doubts, but should not be in all true? if someone tried to change from false to true, and it does not change is semrpe false. tell me if mine is a problem or WHAT would it be?
My hardware is a 5.3, I'm trying to get to work with 5.5.1, but I have not resutado ok. if anyone can help. thank you.true x false.jpg
Bookmarks