i like to know if is possible flash a brand new Denso ecu , mitubishi 1860A767 ?
its look great tool but i need for some specific modules any advice ?
i like to know if is possible flash a brand new Denso ecu , mitubishi 1860A767 ?
its look great tool but i need for some specific modules any advice ?
the life is easy... people complicate!!!!!!!!
life is funny just step away of people that wants make your life a shixx
......
http://youtu.be/PEw3nYmpEys
hercamp (4th July, 2017), mexanico1971 (2nd October, 2018), pablo1971 (13th February, 2017)
the life is easy... people complicate!!!!!!!!
life is funny just step away of people that wants make your life a shixx
......
http://youtu.be/PEw3nYmpEys
pablo1971 (13th February, 2017)
Hello
In the Legacy MY 99-2002 Twin Turbo (also called B4 RSK) has been installed Unisca Jecs ECU with few variations of MCU Renesas M32R (different memory sizes). Module 29 for MMCFlasher will help you (can read/write all this ECUs). In Legacy 2003 TwinTurbo BE5 and WRX STI 2003 has been installed ECU with MC68 MCU inside and you can read / write it with Ecuflash free software (via Open Port 2.0)
BR
Professional EGR, DPF, CAT, VSA, NOx, ADBlue, DTC solutions here...
What you mean 'blank ecu'?
If you mean that ECU as new in factory state - MMCFlasher allow read/write ECU without problems
If CAN connection with ECU not possible (in case if bootloader in flash of MCU Renesas has been destroyed) only Pisaini, Fgtech and similar tools can write flash in MCU (via RX TX connection on the bench)
BR
Professional EGR, DPF, CAT, VSA, NOx, ADBlue, DTC solutions here...
hercamp (14th February, 2017)
Hi !
I have buy MMC-Flash with VAG Module 56 and got it today.
Is there a english description of the functions please ?
BR
Is there any open port who can do vag dsg ?
Great product and support.
nice...looking at getting one myself..keep the thread updated with what you do please.
MAGPRO X17--AT-200--SCANMATIC BENCH--PCMFLASH--MITSUBISHI MUT-III---OPENPORT 2 MMC FLASHER
Mmcflasher can read total med17 edc17 vag?
For decode, or only partial for tuning?
Hello
Ford PCM Visteon ESU-412. MMC Flasher read and write only flash?
Or eeprom with VID data too? Possible to clone or virginize ESU-412?
Last edited by carmelasse; 6th April, 2017 at 08:06 AM.
TIPS MMcflasher Vag MED17 EDC17:
identifies SW ecu IMMO ON = OK
identifies SW ecu IMMO OFF on flash= NO
Ecu immo off eeprom+ flash = read / write= OK
VIRTUAL READ: identifies SW ecu = download server MMC file ori. NOT REAL READING.
read ecu immobilizer OFF = NO
write ECU decode= NO
Original ecu + imo cars + 100% original panel = OK
Ecu immo off eeprom+ flash = read / write=ok
Last edited by datapage; 6th April, 2017 at 04:02 PM.
pablo1971 (10th April, 2017)
Module: Module 56 Bosch UDS ME(D)17/EDC17 CAN 10.0(063)
License: XXXX
[Adapter name] Bosch - MDI
[Firmware version] 8. 3.103
[Dll version] 2.3.103.26
Battery: 12.336V[10:47:14] Writing ROM
[10:56:54] VW/Audi part number: 03L906019G
[10:56:54] Software version: 9748
[10:56:55] Hardware part number: unknown
[10:56:55] Hardware version: H32
[10:56:55] ASAM/ODX file identification: EV_ECM20BTD01103L906019G
[10:56:55] ASAM/ODX file version: 002011
[10:56:55] VIN: WV1DB42H9B8027777
[10:56:56] FAZIT-identification: BPG-81012.12.0913340213
[10:57:15] CVN: A93B4F31
[10:57:15] Coding: 01 19 00 12 23 26 00 08 00 00
[10:57:15] System description: R4 2,0L EDC
[10:57:15] Engine code: CDCA
[10:57:15] Writing ROM OK
FILE ORI MPPS BOOT
FILE ORI MMCFLASHER
FILE RED After recording with MMCFLASHER.
Very different.
iRom_1037504928 KTAG ORI.rar
FL_03L906019G__9748 MMCFLASHER ORI.rar
iRom READ_1037504928 After recording with mmcf.rar
pablo1971 (10th April, 2017)
Hello
i have question.
Pcm flash with tractrix obd can read in virtual and write new med17.5.25 1.2tsi vag 110ps?
Bookmarks