please rcd 200 code
please rcd 200 code
shooting (11th January, 2023), Titanium2011 (11th January, 2023)
Hello to everybody,
I hope you can help me with a code...
Device is a RCD 200
6Q0035152E
(DE P/N 28091060) 50/07
Made in Argentinia
*014VWZ4Z4GD111107E*
Thanks in advance and best regards, Martin
I tried but it didnīt work... I used a CH341A (black edition) but he never found the eprom.... So I can not read the data
Decode Ghost (30th January, 2023), shooting (30th January, 2023)
Hi I did that but he couldnt identify the chip and I canīt read it.
Ok I think the chip is dead So another question, does it work if i buy another chip and flash the data from another person? I mean can I use the code from the zip file below and unlock it with the code you sent to the data?
Good news and maby helpful for anybody with the same problem I have... I think chip is dead i soldered it out again and cant read it... There is no communication possible. So I soldered it in and the radio works when you press the on button and the other button on the right. Then the radio works but it can not save the programs when you turn off the radio. But then I tried another thing. When you turn on the radio it alwas want to have a code so i pressed the confirm button and then there was a "learning" process. So I turned the key and the learning process startet. Now the radio works even with a reset^^. Code was 1000 but i think every other code would work the same because when I tried the code 1000 bevore the radio was locked^^. So maybe this process works also when the chip is soldered out?
Maybe this information is helpful for anyone
regards
Hello everybody.
I need a dump for RCD200 for 25p10 Eeprom
6Q0035152
Someone tried to get code from wrong ic and now it's corrupt.
429834254_794773102105859_3092841727631977537_n.jpgHello i would like to get help with this one
Bookmarks