CITRO?NN PICASSO 2009 / BSI FLASH PROBLEM

[CARPARTS]

Hi

Citro?n Picasso 2009 with BSI and 95128 eeprom / Johnson Controls.

DP3 has done writing the new km value by "flashing" by OBDII "reading, verifying, writing" but only until 99 %.
Now car is "dead" , no functions anymore.

Need to tell also that i forgot to put extra battery charger, so this was happen when voltage dropped and now car is "dead"

Re-write with DP3 is possible apparently, recognise BSI number (but NOT the VIN) and does automatically pick-up the saved
"flash-file" and will try to recover, BUT DP3 dont flash anymore when arrived @ 99%....

EEprom data looks oke, but i have no idea how to solve this problem !
Put all FF in eeprom also dont wake up the car

Any clues or suggestions ?

Thanks in advance

[sl4ck]

flash BSI with FVDI or SMOK PSA tool, give reference number on label

96xxxxxxxx

BSI 20xx xxx- xxxxxxxx

BOOT xxxxxxxx
HARD xxxxxxxx
xxxxxxxxxx

[austingreen]

flash BSI with FVDI or SMOK PSA tool, give reference number on label

96xxxxxxxx

BSI 20xx xxx- xxxxxxxx

BOOT xxxxxxxx
HARD xxxxxxxx
xxxxxxxxxx

Hello, which site is reliable to get one Smok?

[CARPARTS]

i do not have SMOK or FVDI
PSA = 96 640 590 8002

V 05.01
281201930C
N805243015

boot 28120836-4
hard 28119248-3 C

BSI 04 EV K04 - 00 020309

[austingreen]

i do not have SMOK or FVDI
PSA = 96 640 590 8002

V 05.01
281201930C
N805243015

boot 28120836-4
hard 28119248-3 C

BSI 04 EV K04 - 00 020309

Hello, which site is reliable to get one Smok?

[vageric]

Hello, which site is reliable to get one Smok?

look at http://www.smok.com.pl/?lang=en

[Saniok888]

Hello. I looking good flash file for BSI 2011 Peugeot 3008

--- electronic control unit identification ---

Functional Plan No: 9664058780
Manufacturer: Johnson Controls
Functional Product No: 9666895380
Software Index: 05.02
Calibration Index: 00.00
Diagnostic Index: OR
Serial Number: 012003
Manufactoring Date: 11/8/2030
System: B0
Software edition: 17.20
Software signature: FC.69
Software reference: 9677825280
Manufactoring Date2: 15/8/2011
Programming Date: 21/3/2011
Reprogramming counter: 1


My corupted flash is attached.

Thanks

[mariusf11]

Hi . I am looking for a good bsi flash file for a peugeot expert 2.0hdi 2008 year with johnson controls bsi


Functional Plan No: 9664058780
Manufacturer: Johnson Controls
Functional Product No: 9664059080
BSI software version 003.002
Calibration Index: 00.00
Diagnostic Index: OR
System: B0
Software edition: 03.12
Software signature: 44.01
Software reference: 9601451680
Programming Date: 8/10/2008
Reprogramming counter: 1

Best regards

[tziku]

Here is your eep file. If from a C5 2.0 hdi 2009.

966405908002
bsi04ev k04-00 -81209
b28120836-4
hw 281192483c
v05.01
281201930c

read1 bsi m95128.rar

[sl4ck]

He needs flash i think, if eeprom data is ok, flash is messed up.

Don?t know if you can do anything with easyCAN4, it has jtag interface, but don?t really know if it is solution to flash over jtag.

http://www.scaleochip.com/images/Pdf...32-BRF-200.pdf

[Yass19]

Merci pour le dump

[newgeniehex]

hello
i have a same probleme whit the same car !!
i have repair by obd whit UHDS psa
have you the backup of the flash?you can repair by obd
regard

[CARPARTS]

Hi, here is the saved data from DP-3 / 992 kbyte (flash)

You need eeprom too ? (manual readout by removing eeprom)

You clearly see the area's where are '00' instead of data, comparing other fkashes from DP3....

[newgeniehex]

hello
now you can use this backup but you must to use uhds tool psa
no need backupt of eeprom
after you have restore the bsi the car start direct!!!
can you put the sw of the bsi can you make a picture of the reference of the bsi please
regard

[CARPARTS]

mmm, oke, but i dont have uhds tool

will bring car to PSA dealer and maybe online re-flash will work ??