AVDI or FVDI pcb components

**salkapone** · 18th February, 2015, 08:39 PM

today got fvdi and of course opened it and imagine with me Forgot set MOSFET swiches ,,, try the unit operates Opel everything I tried , fiat ... skoda octavia2 pin code read from the dash

whether that searching MOSFET swices so that they soldered onto the circuit board or to leave it as it is

**gopelhu** · 18th February, 2015, 09:47 PM

Hi all,

Here are two pics for pcb V4-1 (Fly company).
Are them big size with macro mode.

Regards, G

**salkapone** · 18th February, 2015, 10:19 PM

someone can help me with this component description ,,,on my fvdi mising this componentn

**kelekele** · 18th February, 2015, 10:42 PM

This is MOSFET switch relay.In my case is Omron 61g1
https://www.components.omron.com/components/web/pdflib.nsf/0/9B9ACB8156728F1B85257201007DD5AD/$file/G3VM_61G1_1210.pdf

Your device working without this switches?

**salkapone** · 18th February, 2015, 11:23 PM

da radi,,,sad neznam sta neradi ,a sigurno neradi kako treba,,,,danas ga dobio i probao na astri h pin iz ecu o.k,,,skoda octavia2 pin iz sata o.k,,,fiat iaw 59f procitao eprom,,,kilometre na puntu 2003 uradio kako teba,,,,ford na canu nista nece samo procita kilometre,,,dali cu postici ista sa ovim relejima

to work ,,, now I do not know what reluctantly, and certainly reluctant to be ,,,, got it today and tried to astra h pin from the ECU ok ,,, SKODA octavia2 pin from DASH ok ,,, fiat IAW 59F read eprom make virgien o.k,, , ,,,, ford on the can of nothing would only read the kilometers but not calibrate ,,, if I am going to achieve the same with these relays

**kelekele** · 18th February, 2015, 11:35 PM

Mislim da neces nista postici sa ugradnjom tih mosfet prekidaca.Imas li mogucnost da otvoris obd kabal,mozda su u njemu prekidaci postavljeni?
In respect for other members ,we continue dialog in english.
Strange if this device working without switches ,maybe manufacturer put them in obd connector?If like you say ,device work properly without mosfets ,you dont need soldered them on pcb.Please if is possible take a photo of booth sides and post here.

**salkapone** · 18th February, 2015, 11:45 PM

can not open the OBD cabal ,,, but I have from the original abrites avdi 72 OBD cabal ,,,, try with it if I am going to burn anything ,,, what do you think the pinout given is the same as the original ,,,, I tried to tag tool from abrites 72 and works with clone ,,, I doubt that the in oBD cable MOSFET integrated

**salkapone** · 18th February, 2015, 11:53 PM

but how work this device ,,, no logic ,,, are not they a bridge or connection of the pcb to the db conector

**kelekele** · 19th February, 2015, 12:13 AM

Make a try to trace lines with ohm meter from pcb to obd cable connector .If is shorted ,no switches in cable at all.
Look at the other side of pcb,and you must see connections and lines.

**salkapone** · 19th February, 2015, 12:28 AM

I will try tomorrow ,, and I'll write the result
good night

**overs0ull** · 19th February, 2015, 08:02 AM

today i recieve the adg1406bruz and l9637D and i will replace them and will post the result are the FVDI will start to work via K-line big Thanks of "Gopelhu".
Gope congratulations for the success and finish the project this is just cool .
How it work now you divice did you already try it .

**gopelhu** · 19th February, 2015, 08:49 AM

Originally Posted by salkapone

da radi,,,sad neznam sta neradi ,a sigurno neradi kako treba,,,,danas ga dobio i probao na astri h pin iz ecu o.k,,,skoda octavia2 pin iz sata o.k,,,fiat iaw 59f procitao eprom,,,kilometre na puntu 2003 uradio kako teba,,,,ford na canu nista nece samo procita kilometre,,,dali cu postici ista sa ovim relejima

to work ,,, now I do not know what reluctantly, and certainly reluctant to be ,,,, got it today and tried to astra h pin from the ECU ok ,,, SKODA octavia2 pin from DASH ok ,,, fiat IAW 59F read eprom make virgien o.k,, , ,,,, ford on the can of nothing would only read the kilometers but not calibrate ,,, if I am going to achieve the same with these relays

Hi,

You got the J1850 adapter for FORD?
If not , then your interface will not working the newer Ford 2005< (J1850 adapter).
Furthermore pls contact MACKIE DK veteran member. He's got one of those.

Regards, G

**gopelhu** · 19th February, 2015, 08:58 AM

Originally Posted by overs0ull

today i recieve the adg1406bruz and l9637D and i will replace them and will post the result are the FVDI will start to work via K-line big Thanks of "Gopelhu".
Gope congratulations for the success and finish the project this is just cool .
How it work now you divice did you already try it .

Hi,

I'm still working on the full solution.
At the moment there is half the battle, because there is a lot of difference in the database.
The firmware versions are the problem. Grrrrrrrr.....
I am glad that your interface works perfectly !!!!

Regards, G

**overs0ull** · 19th February, 2015, 10:08 AM

guys please can someone tell me what is the resistance of the smd resistor C23 on the left side of adg1406bruz cause maybe i kill my one .
I desoldered it and the multimeter can't catch it on 200 m.ohm
Thanks

**gopelhu** · 19th February, 2015, 01:34 PM

Originally Posted by overs0ull

guys please can someone tell me what is the resistance of the smd resistor C23 on the left side of adg1406bruz cause maybe i kill my one .
I desoldered it and the multimeter can't catch it on 200 m.ohm
Thanks

Hi,

C23 not a resistor but capacitor !!!

R(xx) is a resistor
C(xx) is a capacitor
X1 is a XTal
Y1 is a XTal

C23 is beetwen 100nF-1uF.

Later I will check it and let you know the result.

Regards,G