AVDI or FVDI pcb components

**gopelhu** · 10th July, 2015, 05:48 PM

Originally Posted by AC_SHNITZER

Friends not shure for you but i have testing 5 different all software FVDI that may be is clone of clone of clone... and with all i have problem with Tag tool - it failed to read 99% of transponders , when i open program checks for programmer and is found it bit when i press detect /read almost every time i have message - no found transponder or something similar Do any have solution for this problem may be something on programmer board is wrog because red diode light up and green blink for the moment when search for a transponder .

Best regards Ivan !

Hi Ivan,

Your antenna works well. Test on a pcf7936 id46, and if reads 4 bytes, it is good, despite writes the error message.

Regards, G

**majsterx** · 10th July, 2015, 10:23 PM

gopelhu, good work, very good work !
All needed thanks for u hobby in free time. Study clones pcb is good idea. And way to produce more stable version.
Smarter than all Chinese factory in one bag

Waiting for you project update, very interesting.

**AC_SHNITZER** · 23rd July, 2015, 05:49 PM

Originally Posted by gopelhu

Hi Ivan,

Your antenna works well. Test on a pcf7936 id46, and if reads 4 bytes, it is good, despite writes the error message.

Regards, G

In fact my tag tool read pcf 7935 but not 7936 , with 7944 read some data and give error very strange thing .. may be is a software problem . The way that is used to read transponder with this stupid OP amplifier mcp6024 is not the best option

**gopelhu** · 3rd August, 2015, 06:35 AM

Hi,

Pls make some pics with your tag sw when you read some chips.

Like.... 1st read pcf7935, 2nd read pcf7936, 3rd read pcf7944. I will check them....your pics...

Regards, G

**gopelhu** · 4th September, 2015, 01:02 AM

**djollie** · 4th September, 2015, 04:56 AM

Originally Posted by gopelhu

Hi,

K-line fixing it with ADG1406BRUZ and ADG1404YRUZ and K-line ic L9637D.

Regards, G

hi
i changed these ic's but kline still not working??
is this the correct ic's i have purchased??
http://www.digikey.co.uk/product-det...497-11729-5-ND
http://www.digikey.co.uk/product-det...ADG1406BRUZ-ND
thanks
dj

**gopelhu** · 4th September, 2015, 06:22 AM

Originally Posted by djollie

hi
i changed these ic's but kline still not working??
is this the correct ic's i have purchased??
http://www.digikey.co.uk/product-det...497-11729-5-ND
http://www.digikey.co.uk/product-det...ADG1406BRUZ-ND
thanks
dj

Hi,

You bought the correct IC's from digikey.

I have seen an other thread that Micromax man removed 3pces components and solder two pins this IC: ADG1404YRUZ

Maybe these ics are damaged on your FVDI, pls check attach (Micromax uploaded this pic).

Regards,G

**turbocip** · 8th September, 2015, 12:15 AM

Very interesting - but working ?

**gopelhu** · 14th September, 2015, 11:58 PM

Originally Posted by turbocip

Very interesting - but working ?

Hi,

Yes this solution works perfectly, I tested it.

Regards,

**impactops** · 10th October, 2015, 06:04 AM

It's a shame that DK has become a source of information (R & D) for the capitalists, claiming it's there own project while using members knowledge and experience to complete it.

Regards
Impactops

**micromax** · 10th October, 2015, 11:06 AM

If you need send fvdi to china, watch out for such modification FLY stop fvdi. Because it is a modification of their goods.

problem is broken MCU, not ADG.

**gopelhu** · 11th October, 2015, 06:59 AM

Hi all,

I got this mail [ i have a fvdi sn 06694 fdvi 2015 6 monts activation.my subscription expired and i tried to make a fw update but now red light of interface estinguish and red and green light of dongle light both intermittent .i have j link serger for write lpc.do you think you can help me? thank you ].

Now I upload the correct fwdownloader which you will update your interface, but you will need to buy more activations, like one year.

Pls contact with Fly company.

Regards,G

**gopelhu** · 11th October, 2015, 11:29 AM

Hi all,

IMPORTANT !!!

I ask all those in original FLY company FVDI is that you do not attempt to read-out.
No programmer should not enter into it, because it will lose the guarantee !!!!
So it is looking ahead to three people and do not improve the interface.

Thanks all...

**elgrantorpedo** · 31st October, 2015, 07:41 PM

gracias de verdad no sabeis lo dificil que es encontrar esta informacion en espa?a

**CryptoKey** · 3rd November, 2015, 08:31 AM

@gopelhu
the FVDI having trouble with DASH, some with CAN system, flash in read, and go out there and not come back on, and to pasodo several acquaintances, they are in dDASH CANbus system.
A3. corrupts the Flash?

can be be the mistake of the Software or PCB components (ADG1406 + L9637D) ??