problem with tag programmer
its stop to read 4d and 4c and id46 transponders,I can't find solution
tray to resolder evrything but same,maybe someone have solution
thanks
problem with tag programmer
its stop to read 4d and 4c and id46 transponders,I can't find solution
tray to resolder evrything but same,maybe someone have solution
thanks
Hi Friend,
It is no problem, bec the tagkey tool has read only 4bytes these chips.
I also get this showmessage: Transponder can't read !!!
FVDI cannot read some chipid all infos but only 4bytes. It is no problem.
Pls use the tango programmer and/or VVDI prog programmer.
The VVDI prog programmer is VERY GOOD programmer, I recommended you.
Regards, G
igorr (9th January, 2016)
I correct @olpehu. VVDI-por is a programmer, you mean VVDI2.
excuse my English, is the best.
gopelhu (8th January, 2016)
Hello everyone!!! I have this version of FVDI pcb, reading the whole thread I managed to understand that is the clone of the clode, as you can see it does not have the DS2460. The problem with it is that it does not work on edc15, so I guess is a k-line issue, My question is, do I have any chance of ever making it work better or the solutions apply only to the fly company hardware. Or is there any possibility to find another(better) interface and have it wirking with the software (all 18 active) that I allready have. Thank you!!!20160107_230721.jpg20160107_230753.jpg20160107_230955_003.jpg
Hi all,
Here is common user guide for ORIG AVDI.
It is the latest... including passtru drivers installations....
Regards, G
carcode (23rd July, 2018), carsoftobd (27th January, 2016), Col19 (5th October, 2022), fliper (27th March, 2017), Gery (16th January, 2016), HAMIZA (17th July, 2018), irco (7th March, 2017), ker0sin (14th April, 2016), keyantic (5th August, 2019), killian2008 (19th November, 2018), pattaya2001 (17th September, 2016), ultim4te (13th May, 2017), yahia1908 (30th September, 2017)
hello menbers need info about my fvdi
I was noticing that missing two components, I wanted to ask which components are? See image
They need or not need to put them?
then the other question, I have difficulty with reading EPROM with fiat commander V.54, with error, time out reading, especially with Marelli 6JF, Marelli 6F3, k-line and can, there is a possibility to solve the problem?
My fvdi and 18 all activated software, my best regards
IMG_20160114_123955.jpgIMG_20160114_124025.jpg
Last edited by madmen; 14th January, 2016 at 09:00 PM.
Hi,
Your interface a clone of clone, not a FLY company product !!!
The two IC that are the missing : DS2460 SO8 and 74HC32 SO14, but these ics are does not need !!!! All FVDI works perfectly without these IC's.
Try to read all ecus with this sw version: Fiat v5.1. I tried several times all Fiat ecus and works perfetly with ECU flasher and ECU cloner... etc.
Regards, G
hello thx to reply me,in effect version v5.1 work , marelli j6F read 2Ep ,write 2 ep, but not write nothing,because i read again 2ep and same old buffer, iaw 4Af read and write perfect same for marelli 59f clone ecu work perfect, marelli ME7.3H4 boot mode work perfect,only version v5.4 same ecu not work, but version v5.1 ok,marelli body computer punto with code read perfect mcu,panda body computer same perfect V5.1 and ypsilon body,tacho, ecu ME7.3H4 ok
maybe is the version v5.4 have a problem
i found internet version v5.7 but can work with my interface? there is a risk to block my fvdi with this version?
my best regards
Last edited by madmen; 15th January, 2016 at 09:50 AM.
Hi madmen,
I tried some fiat ecus the v5.1 version and works perfectly.
The newest version ( v5.4 ) has some bugs and maybe this is your problem.
Pls do not try the v5.7 version bec it is an online version, and if you does not have a softdog version then the v5.7 will be damaged your FVDI.
Regards, G
madmen (16th January, 2016)
la foto 1.JPGla foto 2.JPG
Hello friend, I have a 2015 FVDI softdog (Full 18 sw) expired.
I've tried to do many things and I managed to change the days of activation available.
I managed to change the playing softdog.
the program starts but fails to connect with FVDI. waiting to connect to interface .......
anyone know how to link the tool?
greetings from the Mediterranean
Last edited by franke232; 22nd January, 2016 at 12:35 AM.
This picture of botom side, from what version is?FVDI ver 3 and 4 not have bottom components.
All components marked and on internet you can find their usage.
ADG1406BRUZ-16 channel multiplexer ,etc...
ipad 2494.JPGipad 2495.JPGipad 2496.JPGipad 2498.JPGipad 2507.JPG
Versi?n 6.3 SW
versi?n pcb Flyaudi V4-1
firm 1 versi?n 2.18
firm 2 versi?n 2.10
unit buy in flyobd
Last edited by franke232; 22nd January, 2016 at 11:13 AM.
Bookmarks