same problem need help
same problem need help
i have same problems yesterday
Green/red light on FVDI is not flashing
Dongle (red dongle) red/green flashing and pc won't detect.
flyaudiV4-1.pcb
hi, someone know if the k15 must connect to pins db25? i have k15 connect to pin 5(j1850-) but the other pin of k15 can't check where is connected, some help. my fvdi doesnt work.
thanks in advanced
Last edited by churras; 2nd June, 2018 at 04:13 PM.
it seems FVDI deliberately killed all units after update connection, rumours say this is a revenge action after some internal problems (unconfirmed) but it fits in their unreliable image they built....
hello
ihave fvdi 2016 and same problem after installing license its killed no pc communication and soft dog flashing
alex7878 (1st November, 2018)
Hi all,
so thanks for some members that they answered some messages........
now i answering some question, pls understand for me anybody.......
1.) FVDI V2015 or higher with softdog versions:
If the pc cannot detecting any fvdi's then the LPC1788 processor was erased ( the Quickloader v6.3 and v7.0 will erasing the LPC processor ).
always erasing are the following two address: 0x00000000-0x00047FFF or 0x00000000-0x0007FFFF , pls check the attacment.
After the FVDI died bec there are no has a BOOT sector and the some firmware rows. Still i working on this solution.
2.) if you cannot bought any FVDI's from FLY Company, then the pc will go to internet then always erasing all FVDI LPC processors by FLY server !!!!!
3.) I solved all algorithms to fvdi firmware encrypting/decrypting and now i looking the 8bytes key to v2015 version. pls be patience anybody's.....
Regards, G
Last edited by gopelhu; 16th June, 2018 at 07:16 AM.
abdonete (29th June, 2019), amaflo (10th June, 2018), dorcky (10th June, 2018), kire106ka (6th August, 2018), makadam (28th December, 2022), mexanico1971 (28th July, 2018), miloudmess (20th July, 2018), pifulete (10th June, 2018), PocketHero (15th July, 2018), Samsara (10th June, 2018), stas12 (18th March, 2019), Stelaras26 (10th July, 2018), taxo1965 (15th July, 2018), waldigsi (27th June, 2018), yellowstilo (11th June, 2018), ziomski (12th June, 2018)
Hi. nothing new from Gopelhu?
Hello guys,
Soryy for this question...what to do for this ***** clone?
Thank you!IMG_3489.jpgIMG_3490.jpgIMG_3491.jpgIMG_3493.jpg
I had the same problem with my fvdi, fly company deleted the bootloader.
fvdi not led and sofdog blink red/green and error device not opened.
fvdi dead .
I got it repaired flashing lpc with uart
thanks kver
never buy more in fly company, stolen company
hi where can i find K6 Omron 61g1 MOS in the pcb,i don 't see in my fvdi thanks
Hi
I have fvdi v2016 with softdog.
My fvdi did not have communication with the server and that's why I started to combine and now the fvdi stopped working. I used Fwdowloader and ruined something. Now in fvdi, the green LED is constantly on and softdog the same.
please help. I wrote to Flyobd.com, however no one wrote back.
I have the original fly version of FVDI V2016 STIC technology. I did not know that the servers have a break and I broke my hardware :-(
My problem.I have pcb 3 V 4-1 I have flashed with lader version 7.Now does not work anymore.
I need last version of 2014 with firmware downloader with Full (18) data table and firmware or what working fw da + data table
Who can help me ?
Maybe Gopelhu ?
Fvdi 2015- Softdog F01572
Thanks
somebody have a Fwdownloader for fvdi v2016 to orginal fly fvdi? contact from site i silent
thank you
Bookmarks