a better picture would help to get your answer....
a better picture would help to get your answer....
it should be a 220 ohm resistor, there is another one at the opposite behind the USB connector and in between are two capacitors with unknown value, try with 10 or 100 nF when you need those too (picture is still crap, too small to see any details...)
hello, i sent last pictures with my phone and with my laptop i saw they are s...t pictures . Please have a look to this one, it miss one component in my board and i surrounded it in red
Thank you
on mine it's a 22 ohm resistor (code 220) just like the one at the other side of the USB connector - in your case they mounted a 27 ohm resistor (code 270) so you might put a 27 ohm for balance....
james44000 (13th September, 2018)
Ok thanx il will try this
thank you for your the information
hello friends,i have original fvdi from fly and now is nothing light up the led,only got red/green from softdog.
also not recognise usb.any solution for this?
thanks
hi. I want to read lpc, but how bypas security
no erase.
fvdi in.JPG
the same question
Hello, i have FVDI 2016 from flyobd.com and after connecting to the server device stopped working. Green/red light on FVDI is not flashing, no response, pc won't detect. Dongle (red dongle) red/green flashing. Is the solution to this problem found?The device send for reinstatement to a factory in China and received back.After a month of work ,it was blocked again.
hi,
FWGenerator v36
BUSUIOKPETRU (1st February, 2019), carsoftobd (11th January, 2019), Col19 (8th December, 2020), estwood68 (10th January, 2020), guliver21 (19th May, 2020), laki23 (22nd January, 2020), mkii (25th February, 2024), NONO59 (4th December, 2023), Ocis (20th January, 2019), oldero (11th February, 2022), Romanki (21st May, 2022), tawaf111 (23rd July, 2019), vavrich (7th July, 2020), zazd (22nd February, 2019)
Hey guys,
i reworked my key tag tool a week ago with 680pf ceramic condensator,
bought 2 transponders id46 pcf7936, i only could identify 1 of 2 (programmed the one identified)
i then ordered another 2 and i cant identify nor read them, afterwards i could get another two transponders and those arent working either, so my question is i read something about 4 byte in this thread -> what is the issue?
EDIT: turns out the ones i received from the dealer dont work, bought from different guys on ebay and they do work fine!
Last edited by Kayhan 17#; 25th October, 2018 at 01:16 AM.
Bookmarks