datapage (26th August, 2018), electromech (3rd August, 2018), Recoder (9th August, 2018), szengen (3rd August, 2018)
datapage (26th August, 2018), electromech (3rd August, 2018), Recoder (9th August, 2018), szengen (3rd August, 2018)
persona non grata...........Nowy Dokument WordPad.rar
Last edited by szengen; 3rd August, 2018 at 08:50 AM.
fang, Narwalus microcephalus,Spectrum Zx, Atari amiga, Commodore +4
My one dead now used link on here still no joy.
Come on fly one final update so we can get some use out of TM100
one day I can open the software, the next day no
I had the same problem with 7. 02 version and for this reason I instal 7.10 version and when I open the soft with internet online conected he ask me if I want to made update and I select yes and get download first part and after erase flash 1 and after some time give me some errors regarding update not was ok. Now my 2 leds from my TM100 are in orange not single led in green.
I have problem with firmware, can't see my Firmware and not work !
Have some one solution ?
I send mails to flyobd, but not get any respons from them, very strange company !!!!!!!!!!!!!!!!
Thanks
It's now a plant pot mate .....
After one week contact me some one from support and tell me can't fix it online and need to send it back for fix it for free or to send me another new at 250 $.
I think is waste of $ and time with this tool and don't think to buy in future from FLY any tool.
Some solution to try to refix the content of flash firmware 1, 2, serial is posible ?
I think the bootloader is missing from MCU ?
I investigate the problem and I see exist some flash magic tool soft http://www.flashmagictool.com/
for can writhe the MCU with some USB UART interface for LPC MCU, I think is similar MCU family like in FVDI "LPC1768"=100 pins or LPC1788 = 144 pins.
I suspect the Tm100 unit have LPC1788 = 144 pins, but is erased with laser the info label form mcu.
I found pcb at http://www.key-programmer.org/wp-con.../TM100-PCB.jpg
I think P1 connector blue from down need to be connected for programming the MCU LPC and need to be 2 SW, one I find it in top SW for reset "RST" but need to find it the second SW ISP for can read the MCU.
Intersting information find at https://www.exploreembedded.com/wiki..._and_Bin_files
Some one try for fix it by self his tool with this problem until now ?
Last edited by Seby_TM; 9th August, 2018 at 11:08 PM.
My Tm100 now have version 7.10, software start good but when confirm days remaning it close not open more....
I thin problem is server from fly, Maybe better solution is Buy tango!!!
Colleague, download the new version 7.12. http://flyobd.com/shop/download-center/
For me not work with 7.12 I have the same errors.
I think not work this version of soft or another version because my bootloader from my MCU it was erased and can't or block to load flash firmware 1, 2 and my serial, I tell this because my 2 leds ar in orange in my unit, not ony one green !
If some one can find some solution for fix this this problem to tell us.
I think the fly company want to learn chinese language, bcause I set the soft 7.12 in english but new information are in Chinese language.
I think the tm100 have a lot of bugs in soft and the team from fly don't know how to resolve them, this is my impresion regarding this fake company.
Last edited by Seby_TM; 10th August, 2018 at 11:24 PM.
After Update V7.12 it open now and work normal""......For me.
my also work fine
My Brother lent me this TM100 programmer to have a look at.
I downloaded the software V7.10 & also V7.12
What I noticed was the Tm100 said it has firmware V7.06 & do I want to upgrade ( Yes or No )
Clicking No just closes the software? Interesting
Clicking Yes causes the Tm100 to reboot and no light leds are lit.
The software times out, so I tried a lot of different ways to remove the USB cable at different times. NO LUCK with that.
So I was thinking the problem was a timing problem & it was time to bust out a debugger and start to debug this software.
I spent a whole night on this problems and found out the software in my option is meant to ko these programmers.
No Serial number now on the device. Ok let address that problem.
I patched the software & "what do you know" I can read a transponder with V7.12 software.
My conclusion is these people are being D**khead who made this device.
My Brother paid good money for this programmer, & I'm glad I bought a tango.
I'm new to this forum & people here have replied to one of my posts which I'm grateful for.
If anyone is interested in what I'm doing with this issue, please PM me.
I wish to keep this private & only to members who have this problem. In other words, I don't want Fly knowing how I got these to work again. Dirty buggers
Will post private video or screenshot etc & if there is someone on this forum which I need to avoid PLEASE let me know?
Last edited by Locksmiths; 10th September, 2018 at 08:29 AM.
BADBOYS_FOREVER (16th January, 2019), datapage (11th October, 2018), fadhle (17th September, 2018), keymax (1st December, 2018), keysmith (24th September, 2018), Krittanu (6th October, 2018), lion0304 (10th September, 2018), Recoder (16th September, 2018), sleepyrz (13th September, 2018), Weasel3 (10th September, 2018)
Bookmarks